@Support Dasaita Thank you for reminding me never to ask you, especially if I have nothing to ask you for. It's the Chinese after-sales service style, they sell you a real crap thing and the...
@Support Dasaita Thank you for reminding me never to ask you, especially if I have nothing to ask you for. It's the Chinese after-sales service style, they sell you a real crap thing and the...
@Support Dasaita Thank you for reminding me never to ask you, especially if I have nothing to ask you for. It's the Chinese after-sales service style, they sell you a real crap thing and the...
@Support Dasaita Hello, I'm really disapointed, the car readio have 3 years and it's alreday dead and no updated! According to the build number of my head unit, please indicate me what's t...
@Support Dasaita I confirm that the simple soft (the red one) canbus is in the right position: CanBus > Canbus > NO.61; Type > "9 407/2005" > Apply > Exit > Reboot. But w...
Hello @Support Dasaita I success to delete the error message (no thanks to you, should I precised) caused by your wrong advice and version. I put an MTCE_MX V3.78 MCU and an MX ROM system, ...
@Support Dasaita Hello, With the simple soft my screen is a little bit differente cf photos below I tried the parking display on and off but nothing happens I guess my versionofsimplee s...
@Iker Gomez @Support Dasaita Dasaita support made me do a wrong update, and i'll have lot of error on my screen. on this page https://www.dasaita.com/community/forum/topic/131548/problems-w...
https://disk.yandex.ru/d/umCvHqCDzHccr/MCU%20for%20MTCD%2C%20MTCE%2C%20MTCP%2C%20Intel%20Sofia3g/HA/MTCE_HA_V3.78.zip I've found this version, probably not the last, but most recently than the V3_...
Your photo was small, and it looks like to me, a H. In fact, your are right if your headunit is MTCE_HA you'll must update on the MTCE_HA I'm looking if i could send you a file to update
@Fabrizio Dalfa Your MCU seems too old to me, but your PX6 unit seems supported the last update on android 10 I should try the update, if i was you. (it still at your own risk like always with th...
Hello.Please try to update the System and MTCH.-----------------------------------System-20230302:https://www.dropbox.com/s/5w50x3fqkvhiv3f/ha3_rk3399_10.0_ota%2820230302%2B%E8%93%9D%E7%89%99MCU%29...
@Support Dasaita I'm surprised you're making me download a MTCE_HA version, since it looks like my MCU is an MX version. Despite everything, I followed your recomme...
@Support Dasaita Hello I put your recommendations in place by installing the MCU and system file. The red error message is different, but the problem remains the...
Hello The car radio is indeed a PX6 I tried to download the transmitted file again, and tried the installation with several USB keys, but the problem remains the same, with the me...
@Iker Gomez @Support Dasaita https://www.dasaita.com/community/forum/topic/131548/problems-with-zlink-on-px6 I couldn't answer you that I'm fixing a Zlink problem ...
@Support Dasaita Hello I'm furious, the file you gave me is corrupted. (see photo). Nothing works anymore, and I can't go back. Thank you for getting back to me ver...
@Support Dasaita Hello, Thanks for helping me, i appreciate. Like you would, i send you the picture of the original radio, to have the right canbus reference. I send you the both canbus w...
@Support Dasaita for information, i have this canbus (cf image), but i don't find the good setting in the factory setting. Even if i reboot the headunit, the canbus still block on the 59PSAHiworl...
@Support Dasaita Thks for your reply, you can find after the photo of the build number, to send me the latest version to update my headunit, and send me the good zlink apk. Does this head u...
Good morning, I can no longer connect to Zlink, although it worked perfectly before. Is this a problem updating Zlink, or update the headunit. I am currently on Android 10, with a PX6 in versi...