I think @Juan Perez means that you must keep trying to enter into recovery If your unit does not have the recovery partition damaged/corrupted, you must be able to enter into recovery... and Once...

@Wyatt Earp I think you are wrong as you can not apply an OTA update by means of USB cable as the rockchip flash tool only recognizes full image files (.IMG). Nevertheless you can follow the video ...

@Iker Gomez Can you tell me how to reflash the unit? The links on https://www.youtube.com/watch?v=gURlqeCWXPU&t=23s are not working to download the tool.

@Juan Perez Hi Juan! Can you explain this better? Or in spanish languaje if you prefer. Thanks!

@Iker Gomez It was with USB and https://www.dropbox.com/s/r99sdn3fypn85es/HA3_rk3399_11.0_ota%2820220512%29%E5%8D%87%E7%BA%A7%E5%8C%85.zip?dl=0 and following Dasaita tutorial here in the web. After...

Keep doing it until you quit the Recovery, surely will have no other way to recover the drive, I happened to me.

you can try: 1) Reflash again with USB cable mthod 2) use the Sd-Card Procedure like this video: (146) Android 10 Update PX5 | PX6 | PX30 MicroSD method (ENG) - YouTube

@Wyatt Earp how did you reach to a black screen? What upgrade were you doing' from A10 to A11 via USB cable and Full image?.... from AX to AX via OTA file?....

@Dexter Lab  MAX10 is basically a MAX6 with improvements: *Bluetooth 5.0 *1280x720p IPS display Initially, the ROM is compatible, but you have to check by yourself if all the hardware work...

I have PX6 MAX6 with Android 9 can I use MAX10 firmware to update to Android 11?

@Zeek World I have the same problem!

Hello! I have the same problem. Anybody can help me with this problem?

Hi.I am needing to update my Dasaita PX5 which currently has Android 6.0.1 as I am already having problems with my apps. What Android and MCU update do you recommend and where can I download it fro...

you have to go to Settings, Vehicle and Factory Settings password 126 and Zlinck is active

Thats a shame. Im not that desperate to use it to swap all my tyre valves.

Hello When I first purchased my max-10 px6, I had Z-Link Installed on there, I didnt want to use the App at first and got sick of it autostarting every time I connected my phone. I cant remember w...

@Pat Ti the mic plug is a 3 wire jack female (is the cable.on the left) red wire (left channel) to pin 1 , black wire (ground) to pin 6 and white wire (right channel) to pin 7 The USBs are ...

If you have a canbus box installed you must configure it on factory settings. Try to upgrade your unit with the latest OTA for android 9 available...

@B G try to unplug the fuse of the car and put it again after 20seconds...let's see if is something related to software. Dd you try any uograde before the black screen appeared?