@Carmen MG yo.la.llevaria con algún electrónico para saber si puede arreglar la.pantalla...quizá sea alguna resistencia...
@Carmen MG yo.la.llevaria con algún electrónico para saber si puede arreglar la.pantalla...quizá sea alguna resistencia...
Instead of zlink you will have android auto and carplay specific buttons.. they both are shortcuts to zlink. If you dont have any of those go to settings> vehicle settings and there you w...
@zaki Like this: vivid over G12 qualcomm
Just go to settings>applications select android webview and there you will find a menu to remove all updates for that app and disable automatic updates.
As far as I know, that menu is only for select when the unit will completely shut off after a period of time (autosleep= never shutoff unless a battery level decay is detected). This is the time in...
@Gaby Rouss the firmware that i uploaded is a single img file. Check well what you downloaded and if you decompressed the img file on someway
@Sergio Arredondo Would you mind to publish a picture of the content of your USB stick? You must ensure the update.zip is a valid zip file that is stored into the root folder of your USB drive and...
@Sergio Arredondo did you try with all usb ports available in your unit? In my case it happened that the android auto/carplay usb port never detected the update....once changed to other port and w...
@B C if is in the trunk....how the stock radio could get radio signal? An specific cable should be there for antenna purposes
@Support Dasaita can you ask the developers to change that "prohibit reverse" by a simple "reverse camera"? That text is very confusing to figure out which feature are you playing with.
@B C you have to enter into the factory settings (pass:126) and on the canbus tab you have to select the following: 76 Accord 2013 (BiNaRui) That is the protocol for your cambus box. If after se...
Crashing is more related to android Web view. In settings go to apps>android Web view and Uninstall updates and force to not automatically update. Now you can open waze without issues. On newe...
@Adam Rosenthal you can always use both android and zlink. If you need internet connection on both it could be done by sharing internet connection by bluetooth
@Rob Maizels update to latest available rom for your unit. If the problem persists may be a hardware issue
@Sergio Arredondo en anteriores versiones el cable de la camara trasera se conectaba al AUX IN. ahora en las G12 el cable CAM IN esta en el set de cables de audio.
@Carlos Fernandes check as well on factory settings (pass: 126) over the tab "others" that the option "prohibit reverse" is "enabled"
@Pablo Molina puede ser un tema del launcher. 1) desinstala el launcher y deja el que está por defecto.... a ver si así ves el bluetooth (normalmente con el botón de lla...
It seem to have your rom the boot corrupted...just flash the same or new rom from the recovery menu....
@Javier Moreno As far as I know (correct me @Support Dasaita if i am wrong) and with the short period of time that i am with the latest (A10 in my case) Vivid (Vivid+Scout) update is the following:...
@Al Simmons only by means of your specific text app that could be compatible with andeoid auto or carplay