@Chriss PC Fix Once you reset the unit, it will be shown in the factory tools automatically and continue the upgrade process. By the way, did you remove the SD card? 

Te e echo un pequeño video para mandártelo pero no me deja por aquí ni por particular

Please see videos attached: Video #1 - Consistent beeping noise coming out of the system https://drive.google.com/file/d/19uiQTSUyPs58wWTgLoc_hL-9SmIdsjtU/view?usp=sharing  Video #2 - Touch...

Valladolid

I noticed the "open door overlay" only appears on the screen for a few seconds if you open or shut the doors then. Is there a setting for this overlay to stay on the screen until the doors are shut...

@Tony Ye  Hi Tony! 1. I will try the use other USB Port 2. Can reset the unit into Recovery, because the Display is Black, and there is no haptic feedback to know if enything happens 3. I ...

How to setup for split-screen?  When I update lastest firmware of Vivid10 px6 is can't use split screen mode.

@Chriss PC Fix Make sure you have all the drivers installed and try below: 1. Switch USB port on the computer or 2. Reset the unit into recovery status or  3. remove the power cable and con...

@Gary Lin Make sure your computer is connecting to Internet, you need go to Windows Update to install the driver for Android Bootloader Interface once you have some device unrecognized in device ma...

De donde eres

pues soy incapaz...

Link removed here... I've a backup (some user has ask me in pm). https://drive.google.com/drive/folders/12optcQQSX0jgutYBRtH5Xic3j0MPyIHN

My wifi and Bluetooth is not working I have Px6 Android 10  one day stop working also the Zlink. Please help me out this @@@@ is driving me crazy 

In factory setting instead of putting 126 you have to put adbon you give accept and activate developer options.

hard reset with the fuse....

is it possible root or enable développer options?  

@Tony Ye Actually music autoplay is fixed but not for the radio. 

are you provisioned? could you share it?

Can some one send me the link please?   Thanks

also holding RST button will not get in to recovery mode