@Support Dasaita my setting is "CAN key" but when I enter the app to configure SWC, if I press volume +/- and prev/next nothing is highlighted on the screen. If I press mode,mic,phone up/down...
@Support Dasaita my setting is "CAN key" but when I enter the app to configure SWC, if I press volume +/- and prev/next nothing is highlighted on the screen. If I press mode,mic,phone up/down...
@Support Dasaita i replied in the other thread about SWC issue. Here I'm asking how can I choose which "flavor" fits better my needs
@Support Dasaita yes, if you check pictures above, there is a screenshot where I show "CAN key" as selected value. Despite this, swc up/down/left/right buttons from left wheel rudder don't work. ...
@Support Dasaita yes: as mentioned here in this forum First issue was about android auto/car play; now swc buttons.Now I have (partially) not working SWC keys. But mainly I saw that there are 3 v...
@Support Dasaita I already did what you requested. When I'm in the SWC study nothing happens when I press vol +/- or seek next / prev. Instead pressing mic, phone up, phone down makes...
I jut got that there is a dedicate SWC section in the forum: Forum > Aftersales Support > Technical Supports > SWC (Steering Wheel Control) associated issueShould I open a new thread into ...
Checking the page in this forum about firmware I see that PX6 has 3 Android 11 version: - MAX11 Version:Make Sure your unit is PX6 Andorid 11 - Vivid 11 Version Make Sure your unit is PX6 Andorid...
@Support Dasaita No luck.It still not working.Same issue described in messages that started this thread.In the dedicate setting page, if I press "Mode", phone up, phone down, mic I see the highligh...
@Support Dasaita, which one should I download?I see 2 link in your message.I really appreciate the support you provide but it's a little bit annoying to reset the head unit each time.I know that it...
@Support Dasaita Order SP-DA2538
CanBus was 8, set to NO, apply, reboot, set back to 08, apply, reboot and it doesn't work. Is below picture fine?
As mentioned in this thread I updated the unit using provided firmware. Android Auto wireless works fine now BUT volume up/down and next/prev steering wheel keys stopped. Phone up/down, voi...
I just updated to 20250401 firmware for PX6. I configured the head unit from scratch and looks like now cpu temperature is higher than before. I'm just downloading Google offline Maps, CPU usage ...
@Support Dasaita done right now.Thanks
@Support Dasaita any update about forum maintenance?Pictures are usefull to understand my message above.
Android auto is fully working using usb cable.I added screeshots in following post but they are still "to be approved" :)
This operations should be performed on the smartphone or on the head unit?(I'm having issue with Android Auto Wireless on PX6 unit)