@Support Dasaita for issue 1/ I confirm voice of radio is unchanged. A restart magically resolves the issue with no config change for issue 2/ it hasn't occurred again, but if the radio cold boot...
Posts made by Philippe Marsteau
-
Vivid11 - Radio signal after auto-sleepposted in Vehicle-Specific Wiring
-
Vivid11 - Radio signal after auto-sleepposted in Vehicle-Specific Wiring
Not sure to follow the request. There are two issues: 1/ the device wakes up but no sound in radio app (sound everywhere else) 2/ the device cold boots (full restart) instead of waking up. which...
-
Vivid11 - Radio signal after auto-sleepposted in Vehicle-Specific Wiring
@Support Dasaita I updated ROM without flashing and setting is still auto-sleep. Also it does not do that on all ignition. Just some times, not sure what is triggering it. Car is never off for more...
-
Vivid11 - Radio signal after auto-sleepposted in Vehicle-Specific Wiring
It's been a week and the issue of not booting at all has not occurred once since the MCU 4.04 was installed. At this point I am confident to consider this build fixed the issue . @Support Dasaita ...
-
Vivid11 - Radio signal after auto-sleepposted in Vehicle-Specific Wiring
@Support Dasaita I installed 4.04 MCU and so far (knock some wood) the issue hasn't reappeared yet. I will comment in another week if issue returns or not. I still have it on auto sleep on my end.
-
Vivid11 - Radio signal after auto-sleepposted in Vehicle-Specific Wiring
I installed latest version. Still issue persists. Randomly does not go to sleep properly and eventually won't boot. After waiting a bit and switching ignition on will start again. Looks like an iss...
-
Vivid11 - Radio signal after auto-sleepposted in Vehicle-Specific Wiring
I am already running vivid 11. Do you want me to upgrade to more recent build? I have June 8th build right now.
-
Vivid11 - Radio signal after auto-sleepposted in Vehicle-Specific Wiring
@Support Dasaita Amazon order number 112-1553769-3673022
-
Vivid11 - Radio signal after auto-sleepposted in Vehicle-Specific Wiring
@Support Dasaita any suggestion? I have the radio not booting at least once per day. The RST button also works randomly. I believe I press vertically for 15-20 sec and it is a hit or miss. Ne...
-
Vivid11 - Radio signal after auto-sleepposted in Vehicle-Specific Wiring
@Support Dasaita No it does not help. Yesterday, it went off again, had to use a pin on the RST button and it took at least 4-5 attempts (tried to hold for 20-30sec, or just on/off the RST se...
-
Vivid11 - Radio signal after auto-sleepposted in Vehicle-Specific Wiring
@Support Dasaita I don't want the radio to cold boot every time I turn on the car. Right now I have it set to "standby".
-
Vivid11 - Radio signal after auto-sleepposted in Vehicle-Specific Wiring
Do you recommed me upgrade to VIVID11 build you sent me (when car radio starts) or should I get a more recent version of MAX11? Or should I revert the MCU to a more stable build?
-
Vivid11 - Radio signal after auto-sleepposted in Vehicle-Specific Wiring
I did not, i am now having issue when the radio wakes up from standby. If I unplug the fuse or have the car idle for a very long time the radio boots properly and everything works fine. But if i tu...
-
Vivid11 - Radio signal after auto-sleepposted in Vehicle-Specific Wiring
It was for same kind of MTCH for similar problem in this very thread. Can this be reverted once upgraded if you think it was good for one customer but not for me?
-
Vivid11 - Radio signal after auto-sleepposted in Vehicle-Specific Wiring
@Support Dasaita this is the link provided by your team on this thread for MCU
-
Vivid11 - Radio signal after auto-sleepposted in Vehicle-Specific Wiring
@Support Dasaita sorry went ahead with MCU Version: MTCH_HA_V4.01_1 and it successfully patched. Also upgraded to most recent MAX11. However, i prefer the VIVID interface. I have installed the VIVI...
-
Vivid11 - Radio signal after auto-sleepposted in Vehicle-Specific Wiring
@Support Dasaita I have very similar issue with radio sounds coming and going random on restarts. Also zlink is very unstable. I am on Android 11 - PX6 - MAX11 right now, currently running ...
-
LTE/4G USB Modemposted in Technical Supports
I have exact same question. Hopefully someone can confirm.
-
How to Install a reverse camera ?posted in Reverse camera/Backup camera/Lane camera
@Dasaita Official or@Dasaita team if I have Camry 2012 US _without_ OEM rear camera with canbus, do you confirm PIN2 of the harness (REV) need be spliced to the red wire of the aftermark...
Search
Latest topics
Latest posts
Forum statistics
- Page views (24h):
- 1,805
- Page views (30d):
- 60,668
- Topics:
- 1,457
- Posts:
- 8,258
- Members:
- 2,567
Newest members
Most liked authors
-
Support Dasaita
236 -
Iker Gomez
176 -
Quick Yuan
62 -
Mr Pink
37 -
Juan Perez
37
