Posts made by Carlin Mangar

• MAX6 with android 11, Bluetooth, and "Auto Sleep"

  Had the same issue as well. I am now on HA3_rk3399_10.0_ota(20211015) with no issues. I tried HA3_rk3399_10.0_ota(20220120) and it was where the bluetooth issue appears. So nothing to do with Andro...

  posted in Bluetooth/Wifi Connectivity

  CM

  Carlin Mangar
  7/25/22, 9:42 PM
• Firmwares

    @Tony Ye  Check under Settings > CAR > Extra Settings & the Option "Shutdown Delay when ACC OFF". Set to Auto Sleep to see if you have the bug. It is indeed present if your...

  posted in Firmware & MCU & Map & Software Updates

  CM

  Carlin Mangar
  6/23/22, 9:55 PM
• Firmwares

  @Tony Ye Check to see if the Bluetooth issue is still there when auto sleep is set. I still have the issue - my Bluetooth module is WQ_RF210. There are reports on XDA Central that this is indeed an...

  posted in Firmware & MCU & Map & Software Updates

  CM

  Carlin Mangar
  6/21/22, 9:49 PM
• Firmwares

  @gray corgi telenav_vivid_rk3399_11.0_ota(20220518) is giving me the exact same issue. I think there is a bug with how the system handles resume from sleep.

  posted in Firmware & MCU & Map & Software Updates

  CM

  Carlin Mangar
  5/27/22, 5:13 PM
• Firmwares

  Bt working same android 10 did. It's the same issue android 10 was having! Well its better than the first android 11 firmwares where it required a reboot... you can force it to reconnect now and it...

  posted in Firmware & MCU & Map & Software Updates

  CM

  Carlin Mangar
  5/2/22, 3:37 PM
• Firmwares

  @gray corgi Try the OTA update for Vivid 11. 20220428? Try the autosleep again - seems to be different from before - not perfect but much better.

  posted in Firmware & MCU & Map & Software Updates

  CM

  Carlin Mangar
  4/29/22, 9:25 PM
• IMAGE Update (Android 10 to Android 11)

  I have just confirmed the issue with the SD card blocking the download boot start stage. You need to unplug the harness and re-plug it in if that happens - the USB reports failed device descriptor ...

  posted in Technical Supports

  CM

  Carlin Mangar
  4/10/22, 7:43 PM
• IMAGE Update (Android 10 to Android 11)

  @Salvatore Noschese You need to use a paperclip and hold the reset button (in the hidden hole) until it boots to recovery or it boots to a blank screen (maybe broken recovery). I had the wait for l...

  posted in Technical Supports

  CM

  Carlin Mangar
  4/3/22, 8:30 PM