It seems to be a IR receiver. I didnt know that any dasaita product has a remote control... is there any plug onto the unit that corresponds to that cable?  

@Uhrskov Thomas you can try...my experience with the Dasaita PX6 units is that the bootable SDcard method does not work anymore....(that file PX6_A10_IGV.img file was created by me -my initials)......

@Chillmiester Gabriel are you sure you dont have any amp on your Jeep? Which model and version of Jeepo is yours?  

@Alfonso R que chipset blueooth tienes configurado en factory settings?

Hola Mi telefono nunca se conecta al equipo por bluetooth al menos que reinicie el Dasaita. Cada vez que conecto el Dasaita tengo que reiniciarlo para que vuelva a conectar con el telefono, rara ...

Thanks @Iker Gomez. After step 5 description I would have tried a Android 10 OTA update, but the unit went black screen :-( I asume my problem now is that the boot system has been corrupt.  I...

Ich habe es hier gekauft dasaita Official Store und seid anfang an nur Probleme . Nach dem Update was ich machen sollte geht nichts mehr . wie kann ich garantie in anspruch nehmen .

I have Dasaita Android 11, Vivid11 firmware. It came loaded with "without amp" setting in the Canbus. My Jeep Cherokee has no amp. I'm getting no volume. This is on radio, music apps, YouTube, ect....

@Tony Ye Wow, thank you so much! That fixed it! Also, do you know If I need to have a canbus selected in the extra car settings? I have a unit for the 6th gen legacy, but I have no canbus selected,...

@Jose Oliveras it seeems a bad connection between the coreboard.... Open your unit and check if all cables and coreboard is well connected,,,,

@Uhrskov Thomas your problem is that all the updates that are you trying (according to your description ) are for Android 11. and you have Android 10 (Vivid 10) so....go again to the recovery menu ...

@Brandon Shiers In my case (MazdaCX5). Pin1 and 11 are used by two white wires that go to the Canbus Box

CAnbus TX & RX signals from your car must be connected to the CANBUS BOX (check that some of the canbus box wires are connected to the Car Plug - and check which are the car RX TX signals) .......

@Iker Gomez Do you have anything to point us in the right direction here?  I haven't seen anything from you in a couple of weeks.  It looks like another gentleman is having the same issue...

Hi guys, I tried to firmware updating myHA2206-Vivid10-CP-2K unit. It came preinstalled with presumable Scout10 firmware. Hence I tried to update the firmware the USB with update.zip fil in root f...

I purchased the external TPMS sensors for my headunit when I bought it.  I just got around to getting them installed.  I open the TPMS app and I get no data at all.  I do have the re...

Hi, I just would know what is this, it was inside the cables with my Dasaita PX6.   Thank you  

The SKU is HD5367-H10

The SKU is HD5367-H10

Hi, I purchased a Dasaita 12.3 inch for BMW 7 Series F01/F02 2013 2014 2015 NBT Car GPS Navigation BT IPS HD Output Screen MSM8953 Car Multimedia Radio × 1 During installation I ran into the...