What am I missing? I've checked the instructions in the 1st post, have viewed the video tutorial (a couple of times) and have gone over the thread (a couple of times). My guess is that there are s...
What am I missing? I've checked the instructions in the 1st post, have viewed the video tutorial (a couple of times) and have gone over the thread (a couple of times). My guess is that there are s...
Hello. Yesterday I installed my Dasaita PX6 radio in my Mazda 6 Atenza (2014), with Bose equipment and standard rear camera.I connected all the wiring and it turns out that the steering wheel contr...
From Post #1 at 36770/firmwares - Firmwares USB TPMS is supposed to be located at: https://www.sendspace.com/pro/dl/zxfswv For me, this link is unresponsive. Is the content actually available? ...
@STEFANO talli What do you mean? We are asking Dasaita to post the files. ;-)
@Andrea Sal Check this https://www.dasaita.com/community/forum/topic/62118/image-update-android-10-to-android-11
Good evening Fans, is it possible to update with the update.zip file from vivid10 to vivid11? Vivid 11 Versiontelenav_vivid_rk3399_11.0_ota(20220428) or, is it possible to have the correct proce...
2022-04-19 update we have some feedback about the bluetooth or zlink does not work correctly after image update because the old units's bluetooth chips does not support the android 11 so it's bette...
Hi I have Dasaita max10 vivd witrh canbus installed, everything works fine apart from Imid clock sync. Canbus in factory settings is set to 21. My old stereo was satnav and imid clock was...
@Dasaita Official @Dasaita team @Quick Yuan still waiting.................
Agree, on or off options but not the way is currently inplementing because it defeats the purpose of being a safety feature if it shows up and deseapears when doors are still open.
@Zeek World In my opinion, this overlay should be able to set the time or turn it off completely. For me personally, it bothers and I would prefer to turn it off because I have such informat...
@Tony Ye @Chriss PC Fix When error message shown in the factory tool, you can try any of those three methods which can make the upgrade continuing. Don't worry about the black screen, the unit will...
@Chriss PC Fix Once you reset the unit, it will be shown in the factory tools automatically and continue the upgrade process. By the way, did you remove the SD card?
Te e echo un pequeño video para mandártelo pero no me deja por aquí ni por particular
Please see videos attached: Video #1 - Consistent beeping noise coming out of the system https://drive.google.com/file/d/19uiQTSUyPs58wWTgLoc_hL-9SmIdsjtU/view?usp=sharing Video #2 - Touch...
Valladolid
I noticed the "open door overlay" only appears on the screen for a few seconds if you open or shut the doors then. Is there a setting for this overlay to stay on the screen until the doors are shut...
@Tony Ye Hi Tony! 1. I will try the use other USB Port 2. Can reset the unit into Recovery, because the Display is Black, and there is no haptic feedback to know if enything happens 3. I ...
How to setup for split-screen? When I update lastest firmware of Vivid10 px6 is can't use split screen mode.
