It's a shame - the hardware Dasaita produce is actually OK, but just horribly let down by this lack of after-sales service and ignoring their paying customers. @Quick Yuan once again, I want ...
It's a shame - the hardware Dasaita produce is actually OK, but just horribly let down by this lack of after-sales service and ignoring their paying customers. @Quick Yuan once again, I want ...
@Juan Perez so try the procedure described for booting into recovery menu....otherwise you will never could remove the black screen. Does your unit have HDMI output? If so try to connect it to a m...
I took out the Dasaita, I removed the fuse and the power cable and reset it, but the black screen is still the same.
MCU is the microntroller that controls car behavior (by means of receiving the canbus signals) and other headunit components like: Sound digital processor. Bluetooth ... MCU behavior is par...
@Juan Perez. The MCU you used is "compatible" but something in the factory settings has been changed due to the fact that you never upgraded the MCU with your exported settings..... Without image...
@Iker Gomez which model of BT you have in your unit?
@Juan Perez but please is important to tell us which file did you use for mcu update. Upgrading a wrong MCU file could brick completely the unit.
@Martin M. Vivid version has more characters implentented but they are working on make the radio app better.... They are getting the user feedback....try it and tell us if the current implementatio...
You have to be able to show the recovery menu. Just press the reset button for about 25 seconds....the.unit will reboot into recovery menu....there you will find an option to upgrade mcu . ...
If I could remove the Recobery I could solve it, but I don't know how.
e reset with the pin and still see the black screen.
@anthony davenport if you mean the iGO maps....then you have lost them forever... (They were just a copy for you to try them before purchasing) If you mean scout maps...then go to firmware section...
@Chris A hal9k has all android versions (except 11) use the one for the current version you have and give us feedback
@Jesse Dorosz the unit shuts off automatically.. On the settings>car settings> you will find a setting for adjusting the delay of powering off once the car is off: Of you select sleep mode....
@Juan Perez 1) why did you upgrade the MCU? 2) which MCU file did you use? 3) press the reset button (pin hole) with a needle in order to check if the image comes again to live....if not: 4) tr...
I tried all the current daista firmwares published here and for my case the bt and wifi works as expected.... I would try as last trial the hal9k custom ROM for android 10
Firmware: MAX6 Version : PX6 HA2_rk3399_9.0_ota(20211023) https://www.dropbox.com/s/h8zjji07bn8mopo/HA3_rk3399_9.0_ota(20211023).7z?dl=0
Hello, i just have updated my Dasaita Max6 Px6 Android 9 4GB RAM/64GB ROM Subaru Forester/WRX to PX6 HA2_rk3399_9.0_ota(20211023). I really like the new "dailer app" thank you for that! But in ...
@Scout Support Before that I used the version (20220221) and the Steering Wheel button was still working properly, but the map build in this version is having an audio cut-off error while in naviga...
