2013 Accord EX-L V6 Audio Static

• CB

  Chase Brisson

  10/7/24, 3:43 AM

  Hello all,

   

  I installed the G13 unit in my 2013 Accord EX-L V6 today, and anything above 0 volume results in a ton of distortion and static. If I understand correctly, I will need to purchase an RCA adapter because of the vehicles built in amplifier: https://www.dasaita.com/products/harness-and-canbus-for-land-rover-discovery-3-year-2006?utm_source=copyToPasteBoard&utm_medium=product-links&utm_content=web

   

  My question is, if I am using the stock harness, with the stock amplifier and stock speakers, what do the RCA connectors on the RCA adapter connect to? How does the adapter hook up to the vehicle?

   

  Thank you

  0 likes 0 likes Liked Like

  ---

  4
  Posts

  310
  Views

  Reply

  ---

• SD

  Vip

  Support Dasaita Staff member

  10/7/24, 6:01 AM

  Hello customer,

  If the vehilce comes with factory amplifer,the RCA adapter is possible to make the static issue resolved.

   RCA connector is connected with power cable of the stock harness,here is a picture for reference.

  

  0 likes 0 likes Liked Like

  ---

• MG

  Muriel Grant

  3/6/25, 12:46 PM

  Yes, you are correct that your 2013 Honda Accord EX-L V6 has a factory amplifier, which can cause distortion when connecting an aftermarket head unit like the G13. This is because the new head unit is sending an amplified signal into the factory amp, which is already amplifying the sound. 
  best sex dolls

  0 likes 0 likes Liked Like

  ---

• SD

  Vip

  Support Dasaita Staff member

  3/7/25, 9:45 AM

  @Muriel Grant Hi Muriel,

  Here is the RCA cable for your reference:

  https://www.dasaita.com/products/harness-and-canbus-for-land-rover-discovery-3-year-2006?_pos=1&_sid=7131770ce&_ss=r

  0 likes 0 likes Liked Like

  ---