Hello, I have a G13 in my Tacoma and the rear speaker volume is so low that I can not hear the speakers. I tried everything and it won't get louder. HELP
@Victor Rosario
Hello.
Thanks for your message.
In order to help you better, please provide the following information:
1.
Order Number & Purchase Date.
2.
Picture: Settings > About Machine > Build Number; MCU version.
3.
The front&back side clear photo of OEM radio.
4.
Please confirm if your car has Amplifier(such as JBL).
@Support Dasaita please see attached. Unit was purchased from Amazon on September 20, 2024. The OEM radio is not JBL.
@Victor Rosario
Hello.
Thanks for sharing the information.
Please check the tutorial below then try to update the firmware&MCU to see how it goes.
-----------------------------------------------
Update File:
System Firmware-G13-20250212:
https://www.dropbox.com/scl/fi/vlisvslcxnjaorf4bovg2/update.zip?rlkey=x0l7zfeg7rcf3lgey563d481m&e=1&dl=0
MCU-4.15a:
https://www.dropbox.com/scl/fi/lup0rygoff52bfyy4u4vo/hmcu.img?rlkey=ljxdd49so7dr37qedomg3zdr9&dl=0
Tips:
1.
Download above update file via your computer/laptop.
2.
Format USB drive to FAT32 Format.
3.
Copy the file “update.zip”&“hmcu.img” to the root directory of USB drive.
4.
Insert USB drive into the unit via USB cable;
then it will pop up automatically a window of update.
Alternatively, please manually go "Settings > System > System updates/MCU updates" to start the update.
***NOTE:
Please make sure that you have ticked option "Wipe data and format flash!".
-----------------------------------------------
