Hi, hard for me to believe it but this actually worked and radio started. Thanks so much. Any idea why this happened and how to prevent it in future? 

@Manuel Hermosillo Please go to Apps&Notification > Apps Notification to enable ZLINK's notification and check if the problem could be fixed or not.

@Carlos Contreras We are wondering if you mean that the touched lights are on but the screen is black. Could you send us video or photos to demonstrate your issue?

@Corey Billinger We are wondering if you could update a newer firmware to inspect the microphone issue: G12(20241126):https://www.dropbox.com/scl/fi/592frxth4p5pkbm40155z/G12-2024-11-26.zip?rlkey=8...

@Brad Gottshalk 1) Could you send us a photo to demonstrate the issue you mentioned, we are wondering if you could not see the speedo on the dash?2) Please let us know if you have adjust to au...

@David Karlík  Sorry for the late reply. Please press and hold the RST panel button by pin for 15 seconds to enter the factory setting interface to do the factory reset. Here are some...

@Mark Tammi Could you take a photo of the antenna that you mentioned? Or you could see the attached photo about the accessories.

@Mark Tammi We would like to tell you that 2012 4Runner non JBL is compatible with DYX004. As to other cables, you could refer to the installation guide in the parcel, we have attached some photos ...

@Support Dasaita

Same issue 

I installed a G13 in my 2018 Tundra, and have a couple of questions: 1)  My digital display between speedo and tach is now missing the digital speedo information.  Seems several screens ...

I did the update but still do not get a sound for notifications when in apple car play. Is there a setting I need to adjust for that?

I'm having the same problem cannot activate after update.

@Donald Shearer the 4 to 4.1 is not possible. It does not fit in the original head unit.  Cambus is working because it changes to camera but there is no video. The steering wheel controls are ...

@Support Dasaita I have the same problem. Also steering wheel controls do not work. Toyota rav 4 - 2014 

Hi, my name is Carlos contreras I have a Max 10 px 6 the unit stopped working one day. When I turn the car ignition key, the lights come up but they don't turn off then when I press the reset butto...

Hi, I bought a Dasaita G13 Toyota Corolla unit last year (order SP-DA5548). Everything was working fine to this day. This morning I started the car and the screen didnt turn on. No screen, no ...

@Support Dasaita please see attached for the Build and MCU numbers.   

I just received my G13 4Runner unit and want to know what is the rectangular antenna with sticky tape used for. It is flat about 3/4" wide and 3 to4 inches long?

@Joe K  Hello, Thank you for your contact. We don't suggest to update the systme if the unit goes well. Here is the latest  firmware for reference: Max10（20230803）: https://www.drop...