@Support Dasaita I wanted to add I have a different head unit than the one originally identified in this thread. Mine is as follows  Dasaita Android 13 Car Stereo for Toyota Tundra 2007-2013 ...

@Support Dasaita Yes only with Bluetooth. There is no way to connect the head unit with the factory screws. I just used the press in fittings. The static is only noticeable at low volumes. When you...

Hi, There is the later verison of Zlink 5.4.95 available.Can I update Zlink on my PX6 MAX 10 Android 10 to that version?

@Support Dasaita buonasera, ho appena smontato il tutto: chiamata con microfono esterno inserito - l'interlocutore mi sente bene solo quando mi avvicino al microfono incorporato, lo stesso lo fa c...

I just installed the stereo in my car last weekend it was a newer version of the one we had that bricked during an update. Everything seems to work but it does not detect reverse. If i open the fro...

@Support Dasaita what is this?Full firmware update or ZLink?

@Michael Please go to your iPhone's Settings > System > Reset Option > Reset Wifi, Mobile & Bluetooth. And then reconnect your phone to see if the CarPlay could be connected or not.

@PAUL WELSHEIMER We have ceased publishing OTA firmware updates because the previous OTA releases led to many customers frequently installing updates that were prone to causing issues. Therefore, w...

@Fyan Myers Please kindly let us know if the static only occur when you play bluetooth music, have you connected the factory brackets on our head unit with the cars screws?

@Stephen Maher  We assume that the shut down delay settings could already meet your expectation, if you just want the head unit standyby or poweroff by 30 seconds, 1 minute, our engineer does...

@Dallan Schmidt Please let us know if you consider to order the CB004 cable and check if it will work or not. CB004: https://www.dasaita.com/products/dasaita-car-radio-installation-can-bus-adapte...

@Support Dasaita Hello its been about a week sence i installed the replacement wire harness. it seams like that fixed the problem. all speakers are working 100% of the time. Thanks for you work on...

can I get an MCU update for my px6?   here's my info: Build number rk3399-userdebug 10 QQ2A.200305.004.A1 eng.hct2.20220518.155842 test-keys Kernel version 4.19.111+ #2978 Tue May 17 09:...

I updated my px6 from software version 5.4.3388 to 7.2.3935 and zlink won't connect to my iPhone anymore   please help

No, it's never worked. 

@Support Dasaita Thank you for the clarity. I would argue that it is something you can support, as this is a software based trigger. The unit is still getting power, hence the standby option to mak...

I am having the same static when using Bluetooth. I have a 2007 Toyota tundra with JBL amplifier. Is there a solutions to this problem?

@Stephen Maher Currently our unit can't do like this,but some of the customer can DIY like this,However, it depends on your car model and we are sorry that we cannot provide support in this regard.

@Support Dasaita  Hi JoMaRS, We have do the test,currently we didn't find this problem. Please try this firmware: G13(20250321):https://www.dropbox.com/scl/fi/evprqurgnl7vz8m98l48s/updat...

@Ragu Neopaney Hi Ragu,  please go Settings>About machine and provide the following version information: 1.A clear photo of the stereo's Build Number. 2.A clear photo of the stereo's MCU...