this piece of junk hasnt had android auto wireless forever. why is it a piece of shit?

@Carmen MG Hi there, we are wondering if you want to replace the head unit to a new released series with Qualcomm chip QCM6125 whose hardware has been improved.

@Iain Sherrit Please update the BT module to v5.0.9. (Go to Factory Settings > enter "hctbtup") https://www.dropbox.com/scl/fi/um3zmkvtx81wejfkwulm2/bt1031p_update.bin?rlkey=16771kbsih5btwe0ts3...

@Thomas Nelson Please let us know your order number so that we could record and forward the engineer for further assistance.

@Jason Barrett As to the factory amplifier, we will arrange a new cable and canbus to you. Please just contact with us through email. Your understanding will be appreciated. Regarding to the Carpl...

@Michael Underhill Please try to update the zlink to the latest v5.4.36. https://www.dropbox.com/scl/fi/mq7o6920wpazsv4fxpf0t/zlink5-hengchangtong-release-v5.4.36-c7d5582fd_jg.apk?rlkey=gb8fvtqtba...

@Gary Crumly Could you please show us a small video to demonstrate the situation that you mentioned above? We would like to forward to the manufacturer for furthe assistance.  As to your descr...

@Jesus Sancer Please make sure that you should remove all the USBs that connected with the head units before proceeding the update.

I have a Dasaita px5, 1024 x 600, could you please tell me what stable firmware and what mcu I can put in it? thanks a lot

Ok sorry I work nights and have been working a lot. I got the update in and finaly got the command promp to come up. The screen is still blacking out, sometimes it has a back light sometimes it out...

Although I've tried that already I will try it again.  Thank you.

En el móvil, en las aplicaciones, vaya a Android Auto y LETE TODAS LAS ACTUALIZACIONES. A continuación, vaya a la PlayStore y actualizar Android Auto de nuevo. Una vez hecho esto, a...

You have to go to Settings, Bluetooth and link the OBD once linked go to Torque and connect it.

Carmen a mi me paso lo mismo que a ti cambia la pantalla y esta funcionando. Ahora comprendel nuevo Dasaita QCM6125 G12 y la verdad que va de maravilla, no da ningún problema.

@Support Dasaita I have a factory amplifier ( non JBL) all steering wheel buttons work fine but the amp will not turn on

@Michael Underhill 

@Michael Underhill 

@Support Dasaita 

@Support Dasaita, I did install with the power off.  I have removed the unit and the errors go away.  Then re-installed the unit and the errors return.

I've updated firmware, MCU, Bluetooth driver and Torque app to the appropriate levels as per Support articles. Firmware: QCM6125  20240322 MCU: MTCH_HA4Z_V4.11_1 Bluetooth: BT1031p Torque:...