@Callum Hiscott can I ask how you manually installed the android 10 version again when the screen is stuck on the logo? Did you do it through the recovery mode? Are you able to provide a link ...

Had the head unit for a while, picky real problem I have is my instant fuel does not work and just stays stuck showing 80+ MPG, is it possible to get this working? 

Any advise for a broken recovery?My MAX10 came with Android 11, I tried to install the Vivid ota and now I am stuck on the logo.Tried to boot to recovery, I see lights on the left flashing keep hol...

MAX10 stuck on logo, can't get it in to recovery mode.

deleted

@Carlin Mangar Well, removing the SD card now gave me a different error.  "Download Firmware Failure"   I did flash MTCE MCU 3.78 per Salvatore's direction in the firmware thread.&n...

I have just confirmed the issue with the SD card blocking the download boot start stage. You need to unplug the harness and re-plug it in if that happens - the USB reports failed device descriptor ...

deleted

I'm still stuck on "Download Boot Start".  I've downloaded every driver possible and device manager shows now errors or missing drivers.  I really have no idea what else I can try. &...

@Iker Gomez Iker, what if Factory Reset does not work? What would you suggest then?

No screen popped up, but I did manually install this Android 10 version again, the boot logo issue happened with that also. Seems to be almost like a bug in the software maybe?I have tried multiple...

Same thing happened to me. My screen is stuck on the Toyota logo. I tried everything on the recovery mode but nothing is working. I emailed Dasaita and tried messaging them but have not got a respo...

I've downloaded those drivers and I'm still getting errors.  Now I'm getting a error from Windows that says "The last USB device you connected malfunctioned".  If anybody can help me thro...

@John Chad 

@John Chad already in packages. Rk drivers.

@Salvatore Noschese What drivers do I need?  I downloaded that winusb drivers that i saw mentioned.

@John Chad if remain in maskrom/downloadmode is cause of missed driver. U can remove power for about one minuts from dasaita (remove units and disconnect power cable, or disconnect service battery)...

I used the Factory Tool in the OP and was stuck at "Waiting for loader start" I then used the Factory Tool posted by Salvatore Noschese and was able to get past that, but then got hung up at ...

@John Chad MAX10 Version：HA3_rk3399_10.0_ota(20220329)  https://www.dropbox.com/s/hvpennxur83shk5/ha3_rk3399_10.0_ota%2820220329%2B%E8%93%9D%E7%89%99MCU%E4%B8%93%E7%94%A8%E5%8C%85%29.zip?dl=0...

Can somebody tell me which firmware version I need to get to update my PX6?  My head unit is telling me that I can't run Android Auto with my current version.  Getting my phone connected ...