@Antonio Catalano No problem, we remain at your service.

This is about picture-in-picture functionality, so that any app can show as a widget on the main screen. Look at Mekede DUDU7 for example, they offer up to 4 PIP widgets on the main screen.  ...

Here is my Build and MCU

@Support Dasaita  "Usually we use the USB driver (FAT32 Format) to update the firmware." Formatted two USB KEY 2.0 in FAT32. One already used and one brand new. "Can your USB Key 2.0 be rec...

@Em D  Hello, we've updated the stock. Please check the link :https://www.dasaita.com/products/dasaita-crv-hd-ss-04a-honda-new-crv-power-cable?_pos=6&_sid=a615dd84c&_ss=r   &n...

@Muhammad Fadl  Hello， Please also try to update the firmware back to G12 . G12 Version：Make Sure your unit is QCM6125 Andorid 12 zst27_sc138_12_G12(20241126) https://www.dropbox.com/scl/...

@Jovan Mercado  Hello, Thank you for your contact. Please go to Settings>About machine and provide the following version information: 1.A clear photo of the stereo's Built Number. 2.A ...

@Antonio Catalano  Hello， Thank you for your contact. Usually we use the USB driver (FAT32 Format) to update the firmware. Can your  USB Key 2.0 be recognized the USB music on Dasaita...

Hello. I'm newbie here. I have the Dasaita unit on a 2018 Nissan Rogue. It was working perfectly until the update. Vivid change to scout and that's whe my craziness starts. I don't have any issues...

@Support Dasaita you are out of stock regarding the CB031 wiring harness. I cannot repair the disconnected ground wire bunch because I don't have a molex crimper. Any suggestions?  I miss my M...

@Philip Figueroa My USB Key is a 2.0. Installation also performed using a new KEY 2.0 and the installation failed anyway. I think it is appropriate that firmware updates should also be distributed ...

Hello I update the MCU as recommended by you, sound and rear-view camera returned back as before   still the internal mic quality is very poor and cannot rely on it in apple car paly or the...

@Jonathan SCHOTS ALSUGUREN  Hello, Thank you for your reply. Please go Settings>About machine and provide the following version information: 1.A clear photo of the stereo's Bulid Number...

@Antonio Catalano try buying a new USB 2.0 i bought a walmart Onn brand because my older USB 3.0 gave me that same error 

Hello, Honestly I never paid attention until these days if the temperature was displayed correctly.

Dear DASAITA, would be appreciated a reply to my post. Thanks

@Jonathan SCHOTS ALSUGUREN  Hello, Thank you for your contact. Is  this issue happening recently  ?

@JB  Hello, Thank you for your contact, we sent troubleshootings to you by this email : team@dasaita.com Please feel free to check.

@Muhammad Fadl  Hello, After checking,we found that your order is G12 unit, MCU 4.15a is for the G13 unit. Please try to update the correct MCU as below link: G12 (4.12bMCU): https://www....

@Michael Catarineau  Hello, Here are the trouble shootings: 1.Find a pin, press and hold the RST button for 15 seconds to see if you can enter the factory setup page, if you can, select...