@Diego Micheli Sorry that it must be mother board issue, the version that you update before is the latest that could barely open the Android auto either, do you remember? In this case, we just wond...

Jus inslatted a G12 for Honda Accord 2013-2017 and everything is working well but the steering wheel buttons. I am using the CanBus Nr. 76 as recommended. And I selected Can Key too. Any advise?

@Support Dasaita Sure, please let me know how much.

@Support Dasaita Android auto è partito una volta. Ma il piú delle volte non funziona. Posso provare con altre versioni di aggiornamento? Ogni tanto sembra che android auto riesce a ...

Grazie, scaricato ed installato, va alla grande

@C L We have the mother board HAZB005 for your head unit HA5473-MAX10-CP-HD. If you want to get it replaced, we will send us a price quotation for it.

@Diego Micheli Sorry, update this Android 11 Max one. https://www.dropbox.com/s/6lz72uxn94d17dq/update.zip?dl=0  

@H H @Ryan Ouellette We need your assistance to verify if the improvement of the zlink could be accepted or not. (We have checked with a few iphone with different version and it's improved or not.)...

@Support Dasaita lo he hecho así...pero como digo...el widget de la izquierda es como si quisiera abrir todo el rato Waze y no Google maps ... Esto se puede elegir ?? 

@Supporta Dasaita io ho Android 11. Siete sicuri che posso installare android 10?  

@John Robinson the battery voltage is not necessary to be showed on the whole widget so that we are not going to revise it.  We are wondering if engine oil temperature, transmission oil temper...

@Chase W Please update the firmware to the latest and update the MCU in the same time. Firmware: Vivid 11 Version Make Sure your unit is PX6 Andorid 11(The left widget's map could be customi...

@Diego Micheli Vivid10 could update to Max10, please rest assured, we just want to confirm if thie previous version could improve the situation.

@Brent Rivers We found that you have contacted with us about the OBD issue before. Here is the instruction of OBD issue. https://www.dasaita.com/community/forum/topic/125679/how-to-connect-obdii-o...

@John Robinson As a matter of fact, we don't suggest you to do so.

@Joshua Hall Please go to Factory Settings > enter 126 > App and turn on the Zlink there. If no luck, show us the error you received so that we could better assist. Please kindly let us know ...

@Adam Rosenthal Please kindly go to Settings > System > Factory reset the head unit to check if the page will change or not. In the mean while, down the zlink（v5.4.40）：https://www.dropbox.co...

@Michael Uribe Do you mean that your head unit will power off and on sometimes, please let us know your current MCU and Build Number.

@Michael Uribe Here is the latest MCU(4.12): https://www.dropbox.com/scl/fi/0ksub1bba94rm8ttxfikv/hmcu.img?rlkey=bx8j6osl48uf8nxr6qwbb8zmv&dl=0

@Jason Barrett The zlink team has found out the main issue and will fix it ASAP. Your patience will be appreciated.