@Support Dasaita in my photos I am trying to explain this to you. I have installed the back up camera per your video. And it still does not automatic pop up on my screen. Should I reload software?&...

@Jerry J After diagnosing, we found that the voltage is not compatible. In this case, we are willing to send you another power cable, please kindly let us know your order number and shipping addres...

      I do not understand why the radio plug.We assume that we do not understand each other.If you wish, look at the equipment in the photo. It is easier for you to communicate ...

@Michael Goettl We would like to tell you that the apps that you circled is apps like Hicar of Huawei. Please just ignore it. Regarding to the notification. Please note that zlink can support both ...

@Rohan Ramdoyal Please kindly send us a video to show us the situation that you mentioned above. In the meanwhile, it will be helpful if you can send your order number so that we can better assist ...

@Александр Максименко You just need to confirm if your OEM radio has the plug.

@Kegan Stack There maybe some misunderstanding. We would like to tell you that you should connect the orange back wire with the red wire 2. Then connect red wire 1 to the positive of back light. He...

The power wire on my back up camera is GREEN (wire 2). It is shown in the photo before placed into the wire labeled "Back". I've attached photos of your wiring harness. There is no red wire. 

Hello I bought this: Dasaita Vivid11 Toyota Corolla 2014 2015 2016 LHD Car Stereo 10 Inch Carplay Android Auto PX6 4G+64G Android11 1280*720 DSP Just  a month ago, i had this problem: https...

They have this cable. For connection to radio. There is no connector for this cable on the radio. Can it be connected differently? Thank you.

@Support Dasaita The pins in the plug 2 are intact. The plug is clean without dust. I've also reconnected it firmly.  After reconnection, the static noise became a little bit lower but is sti...

@Support Dasaita I have double checked the connection of "Cam in" and "to Cam" cables. They are well connected as shown in the 1st photo.  The IC cables (black, red and white) are well connec...

I ordered on amazon 112-5159076-4487424  I wanted to switch to max11, which I did and everything was good. But then I though I maybe needed to also install HCT Firmware PX6 Android 11, w...

@Александр Максименко Hi there, we have camvin cable, you can just inquire the shopkeeper of the review 360 and confirm which one to purchase.

@PAUL JONES Please follow the instruction to have a "Wheelkey Study". Step 1. Please go Settings > Car > Factory settings (password：126) > Others > Steering wheel keys assign > Can ...

@Kegan Stack Hey, the wire is not named reverse, it is a red cable, we have attached another cable to you. Please kindly wire the harnesses according to the photo below, pay attention to the red wo...

@Michael Goettl Please kindly send us your order number so that we can better assist you. In the meanwhile, please let us know that built number and MCU on "about machine" is shotted after updating...

I have the same issue in my 2012 Camry. The dasaita px6 Max10 updated to Vivid 10 is installed. My steering wheel keys worked flawlessly until recently. Now they either do not respond or some keys ...

@jogobelo r The version that we sent you is telenav_vivid_rk3399_11.0_ota(20230525). According to the photo that you attached, the current version of your unit is 20221129 not telenav_vivid_rk3399_...