@Grzegorz Urbanski Please let us know if you have try the wired carplay to check if there is something wrong with the zlink? Here is the instruction. 1. Prepare your phone USB cable, and make sure...

@rene lopez  Please let us know if the volume can be adjusted by: CAR settings - Factory settings (Passw:126) and on the Volume Tab raise the BT Volume In terms of the wired carplay connectio...

@William Broach  Sorry to know that the item you order can not meet your expectation. We have reply you via email and may need your assistance. Please just contact with us there. Your cooperat...

@Iker Gomez USB cable plays the role of bluetooth while the phone is wired. We have 2 ways to connect the carplay and here is the wired one. 1)Prepare your phone USB cable, and make sure it is ori...

@Iker Gomez Thanks for the answer. I'll try my luck with the flash tool tomorrow. the recovery mode cannot be activated.

@fab Bond as I remember there is a setting under vivid settings for such behavior. You can avoid to go to main screen with that setting. Look for it

@Frank Krottenmüller what exactly do you need that is not included in my post? The max10 is a px6 unit with Android 10. So use the provided flash file (img file) for A10 to recover your syste...

@Iker Gomez i have uptated with "telenav_vivid_rk3399_11.0_ota(20230107)"  All is ok, but any idea when i use carplay it returns to main menu after about 30 sec, i have now zlink 5 just befo...

Hello,I need a working image file for my Max 10.is there anyone here who can help me? I also had the wrong update installed at the time and now I haven't had a radio in the car for weeks. 😒 Since ...

@Iker Gomez Merci pour vos réponse

@William Broach I don't think this issue is a.technical issue so you will use to deal to after market support by means of giving them all the evidences for a free part replacement 

Is there a better contact email or form for orders places/received directly from theDasaita site? It looks like the in-dash face plate that was supposed to be compatiblewith my vehicle is not.. it'...

@Salvatore Aiera This is due to an Update of the Android WEbView. Go to Settings - Apps - and look for the Android WebView on the three points menu you must remove updates and disable updates for ...

Bonjour, certains programmes android, notamment Waze, ne fonctionnent plus sur mon PX30. Dois-je effectuer une mise à niveau ? Merci pour votre réponse.

@Telenav Scout Email sent.  Let me know if you need any further information.  Let me know how to proceed.  Thanks.

I'm having the same issues crashing with the others upgrading to Scout 3.3.10.  I also had to downgrade to Scout 1.1.1543 HCT in order to get it to boot.  Will get my serial number and se...

If I am not wrong , your issue was that the BT do not disconnect when the unit is on sleep? Perhaps is a comination of phone/BT chipset, because i didnt experiment that issue. Did you experiment ...

@rene lopez Carplay uses the BT audio connection for the audio while it uses WIFI/USB for the video. Check on the BT music app if your volume is low too. If so, go to CAR settings - Factory setti...

Hello recently got a dasaita unit ! It's a good dash but I having issue with the zlink CarPlay . After connect via bt it lower down the volume after few minute.. around 50% lower , I tried differen...