@Iker Gomez @Jose Guillermo Huertas Lancheros Yes, I had these settings set to "auto sleep". Now it's ok and it's fun to show the logo. Thank you very much for your help Mr. :)

Hello, I have a MAX10 device (rk3399, Android 10, with latest SW as of writing this post, i.e FW: HA3_rk3399_10.0_ota(20220824) , latest MTCE MCU 3.78). My device can only connect to my phon...

Hi @Fabrice CUVELIER , I saw that you solved the issue by connectin the wire of the buzzer. Can you explain me which wire is it? And what's the 'buzzer ringing'? Thanks, in advance  

Good morning, I am an owner of HA-5373-MAX10-CP for Nissan Qashqai 2008-2014 with all cables for the stock bose system. (amplifier + audio system) System problem: I have a problem with backgr...

Thank you for your help and I will try to check how it is with me

The unit in sleep mode just consumes a few mAh...and it has an algorithm to detect the voltage of the battery and when it is low the unit goes off without compromising the car start. As Guillermo ...

@WILLIAM MCDONOUGH probably your USB LTE dongle requires specific drivers to work with android ... That are not included into supplied rom

I have a Dasaita supplied Telenor 4G dongle and just plug it into one of the unit's USB ports to get WiFi over Ethernet.

I want to use my usb LTE, which shows up as cdc_ethernet rndis.  I am unable to click on ethernet, I get a pop-up about not being allowed.

Hello @Colin Jones , deseas usar tu telefono para compartir internet o para usar Android auto o Car Play?.1. Para compartir internet la unidad ahora lo hace a través de Ethernet y no requier...

Most likely in Settings/Vehicle/Extra Settings/Extension Settings/Close delay when ACC off, the Auto Sleep box is activated; in this case the unit will always have power and every time the car is s...

Hola Andres, comote conectas a internet?. Yo lo hago de dos maneras, con CarPlay  usa datos del celular pero solo para la aplicación Zlink. Para tener wifi para la  unidad uso el...

@Gioele Corsinovi what changed in that weeks? Dis you perform any upgrade?

I have the impression that my unit after installing the latest software also does not turn off correctly. Earlier I had so that as the car stood longer not started the DASAITA unit started from the...

I am also having this issue but I wanted to say that I noticed once you change the bluettooth options in the CAMBUS environment you need to go back to the andriod settings and choose bluetooth.&nbs...

@WILLIAM MCDONOUGH for.max 11 you have newer firmware available....but I recommend only to upgrade if you experience issues with your current firmware version:   MAX11 Version：Make Sure your...

I have had a recurring issue with my Max10 not powering down properly.  I will come out and start the car and my battery will be low and struggle to start.  When started the Max10 unit wi...

Where Is this file..? After last firmware update my car logo disappear.... car.ico

@Iker Gomez Thx! Naturally, Ijust found this about 20 min ago on xda developers. https://forum.xda-developers.com/t/dasaita-latest-mcu-and-updates-for-rockchip-cpu-platform-stereos.3575155/page-21...

@Jon Tuttle check on the factory settings (first tab of options) if you have CarPlay settings activated. Reboot and your zlink app will be unhidden