@rene lopez Please let us know if you have used a MIF USB cable to whether the wired carplay has the same problem. Or as you mentioned above, the volume just changed when you call out siri or waze ...
@jake v Please go to: Settings-Display-"Brightness Level"or"Night display"(Adjust the screen brightness) Meanwhile, you can go to: Settings-Accessibility to make other display adjustment.
@Mario Racioppi Really sorry for the inconvenience, in this case, we suggest you can shot a video of the problem that occurred. (Including the voice adjustment of the radio and other apps)We will r...
@Iker Gomez actually yes ! Sometimes when I press the voice button with Waze,Siri,or google maps it come back the volume but still don't know what to do lol..
@jake v When you're in reverse use one finger and touch the screen. Keep the finger touching and the selection will be there. If this doesn't work, look for a tiny square in one of the corners and...
@Frank Krottenmüller you have your unit be connected to the pc by usb-a to usb-a cable (usb-a to usb-c does not work). You must use the single usb port cable of the unit (not the dobl...
@rene lopez it seems a zlink issue with assistant... When using the assistant it lowers the voice....just check siri or ask siri something in order to check if ...after siri responded volume comes...
@Support Dasaita it's all the top !
Finally got the backup camera installed and bummed out with the image quality from what I understand on majority of Android head units there is a way to adjust the brightness contrast and quality s...
Finally got the backup camera installed and bummed out with the image quality from what I understand on majority of Android head units there is a way to adjust the brightness contrast and quality s...
@Support Dasaita Yes, I saw this menu, I also tried to put value 2 on the radio, I pressed apply and exit the tablet restarts but it shows no signs of change, everything remains as before whatever ...
@Iker Gomez Bluetooth is a techonology to connect the headunit and your phone. If you use carplay or bluetooth to play music, the signal will be transmitted by bluetooth. If you use USB, the signal...
@Mario Racioppi Please follow the steps to make volume adjustment. Settings-Car-Factory settings-enter "126"-Voice
@rene lopez Please adjust the "Voice" to check if the volume can be lowered. If still no luck, please let us know or you can send us a video to our customer service email-address to show the proble...
@Iker Gomez thanks for you answer but for example I turn on the car it connect and everything runs ok volume 5,6,7 all good but suddenly goes down and I need to put the volume at 20 .. someti...
@Support Dasaita thanks for your answers but in the menu factory setting I don't see the bt volume also if I press the volume tab it just adjust the volume regular ..
How do you change the general audio on Dasaita PX6 Vivid11? In particular, the audio of the radio already at 3 4 value is quite loud compared to other apps like Google Maps (already set to maximum...
@Telenav Scout Even after downgrading to Scout 1.1.1543 HCT and trying to upgrade again to version 2.3.4257 but after install it still shows v3.3.10 and still crashes.
Sorry if I'm annoying again. But how do I get the Dasaita into ADB mode?The device is stuck in the start screen when starting and the recovery mode cannot be activated. I have connected the PC to t...
