@Iker Gomez I selected simple as you stated and I've tried every one of the vehicle options that show up, nothing changes I still can't select any options in car.

@Tony Ye Check to see if the Bluetooth issue is still there when auto sleep is set. I still have the issue - my Bluetooth module is WQ_RF210. There are reports on XDA Central that this is indeed an...

did u get answer for this 

Thanks I purchased a SDCard and getting ready to try rebooting the unit. Quick question, is the mcu file necessary with the OTA upgrade?

I answer myself it is a software problem. The latest updates fix a few things but it makes Bluetooth not work properly. After thinking about it a lot, until an update fixes the problem, I only see...

Why do you want to upgarde? What errors do you have? If working i do not recommend to upgrade In order to get latest zlink updates you must update from A9 to A10 or A11 (for which latest software...

You have to use a OTA for the version you seen on the boot image. download then the latest VIVID 11 OTA available and put it on a fresh FAT32 formatted SDCard...and insetrt it on the unit... (on th...

@Brandon Shiers And what cnbus have you selected on factory settings?

@Iker Gomez.  It is wired correctly.  The odd thing is when I go into car setting for the canbus I can't toggle any settings on or off.  I have enabled reverse camera and get nothing...

it should be....do you have a picture of the adapter plug and how it is connected to your unit?

@Mike Dawoud  What @Jorden Peacock did for solving it (he couldn't access to the recovery menu, whatever combination of reset button) was the following: Get a microsd card and format it as F...

@Iker Gomez ok sounds good and thanks for getting back to me. Although, I do recall the head unit showing 11 during startup. I think they sent me MAX11 and I flashed VIVID10, similar issue as @Jord...

@Brandon Shiers Canbus box is the device that could trigger the camera while in reverse, so it is crucial that you st up correctly the canbus. As i could see in some photos on Amazaon for the CB00...

@Mike Dawoud  you have to enter into recovery menu and there force the last Vivid 10 OTA upgrade Prss the RESET pinhole with a toothpick or similar and leave pressed until you see the recove...

@James Noles  1)If your unit has an integrated amplififer...you must check that you received a Canbus Box 2) Configure correctly the canbus on Factory Settings  (password 126)   ...

Dasaita 9” Inch Car Stereo (this product: https://smile.amazon.com/dp/B08Q3HGG7N) Installed per the included instructions and everything is working (wifi etc.) but I am not getting any audio...

Hello,  I am installing my new dasaita android head unit in my 2009 Tch and have the JBL, so I ordered the canbus adaptor (all off amazon)   The canbus harness barcode reads: Model: TY...

@Jorden Peacock I'm experiencing the same issue at the moment, were you able to resolve?

@Iker Gomez it seems you're the rock star on here, any suggestions? :) 

Hello, I recently purchased VIVID10 but that unit was out of stock so they sent me MAX10 and then I could update it to VIVID. I've done the necessary steps but when it reloads it stuck on Subaru l...