@Philippe Marsteau It is for the PX6，but it doesn't supported be updated again.   As the new system is introduced, we will gradually stop supporting older devices to ensure that the new sys...

@Bohdan Fediuk Thank you for your time.

@Marc Alexander It is our pleasure here

@Support Dasaita The screen is always black so I cannot access any menu on there. I managed to connect via pc/usb: will it work there? I installed the firmware and mcu

@Tyler Martin @Tyler Martin  I was able to get through the setup screens after factory reset using a mouse and keyboard connected through the usb port. once in I did a factory reset and the sc...

@Support Dasaita  The screen resolution issue and vertical lines on the screen appear to be fixed but the touch screen is off and radio home, back and navigation buttons are not working. ...

Hola,tengo px6 android 11,con Max 11,cuando se conecta a car play se desconecta bluetooth si hago o recibo una llamada yo oigo bien pero a mí se me escucha muy mal entrecortado y algunas pal...

@Support Dasaita Hi I did a clean installation of the operating system again to see if this issue disappears about playing a song and the sound is cut off at the beginning for at least a couple of ...

@Support Dasaita  so MCU was not for PX6 after all?

@Support Dasaita ok thank you! 

@osamu nonaka  If you're referring to save the radio station ,please click here.

@Bohdan Fediuk Hello ,we've forwarded this issue to our technical support and they are testing the new firmware to resolve this issue. Please subscribe to follow this issue. Thank you.

@Support Dasaita Thank you, will do.

@Antonio Catalano Thank you for your time ,please get in touch if you need any help.

@Tyler Martin  For the bluetooth,please go Settings > Car > Factory setting (Password: 126) > App >BT to choose the suitable one1.FSC-BW1242.WQ RF2103.WQ-BC64.SDIO-AUTO For the Z...

@Martin Karbon  Hello, This MCU and firmwar isn't for your unit. Please find a pin, press and hold the RST button for 15 seconds to see if you can enter the factory setup page, if you can...

@Tyler Martin  For the Bluetooth，please go Settings > Car > Factory setting (Password: 126) > App >BT to try the suitable one for your unit. 1.FSC-BW1242.WQ RF2103.WQ-BC64.SD...

@osamu nonaka  Just would like to confrim is the factory camera o aftermarket camera？ If  it is factory,you don't need to connect the AUX -V cable. If it is aftermarket camera,please s...

@Philippe Marsteau  Thank you for your time an patience in this matter. We have just been informed that MCU has been stopped updating. Please keep the current version working on the unit. D...

I have the same exact problem. Just started a topic about it as well.