@Timothy Sorrells Sorry that it just supports wired mouse.
@Timothy Sorrells Sorry that it just supports wired mouse.
@Harry Rojas Sanchez If it's too low to be heard, we suggest you to purchase the subwoofer booster, please contact with support team for help, here is the mail: support@dasaita.com. As to the wire...
When I purchased my head unit. Your company told me that it would work Wireless with Android auto. It does not, can I update anything to make it work? Here is a picture of my system.
Hello. I would like to know how to install a bluetooth mouse to my radio. There appears to be no option in the menus. If a mouse cannot be tethered by bluetooth, can one be hoo...
Hello @Support Dasaita I just noticed that the output is too low to be heard. Where I can adjust this? And regarding the wireless connection, what could be, this was working before applies the V1 ...
Yes, it is connected securely. I pulled it to confirm.
@Lwmatt11 Please kindly update the firmware to the latest version. Build: zst27_sc138_13_V2(20251031) Supports IOS26. Download: https://www.dropbox.com/scl/fi/eo78wxbu8oh59jp8d...
@tone T Here are the key points regarding your questions: Fader/Sound Difference: The difference you noticed is because Android 13 models use different hardware with a DTS audio system, which...
@Harry Rojas Sanchez Please let us know if there is none subwoofer output or the output is too low to be heard. As to the rear speakers volume, it could not be adjusted by OEM amplifier, you could...
Hello @Support Dasaita,I tried adjusting the subwoofer volume, but it didn't work. In fact, I noticed the rear volume wasn't working either. I also tried the wireless connection, but it's not worki...
@Support Dasaita thank you for the response. Yes when it is at "0" when the fader is all the way down, the sub is barely audible. It would not make any sense that I have to turn the fader all...
@Aiden Balizet Please take a photo of the rear view so that we could check if it's normal, or compatibility issue.
@Marcelo Eguino We are wondering if you have already proceed the factory reset or not, we don't have newer MCU for PX5 currently.If stil no luck after the factory reset, it may be hardware issue.
@Brad Littlejohn Here are some troubleshootings: 1.Remove the car’s Radio fuse and wait for 3 minutes. 2.Reinsert the fuse and simultaneously start the car&...
@Juan Thank you for the info, we will arrange a new cable to you ASAP, you could also refer the email that we sent you through support@dasaita.com.
@Phil H Please check if the radio antenna has been connected to the back of our radio.
Amazon order: 113-1914211-4841022 SR5 2008 Tundra
Order number SP-DA9193 Note: there is also a blue GPS plug but I did not take a picture as the Dasaita head unit has its own GPS antenna. 2011 Camry Harness Connector 1 ...
