If you need to restart your head unit while your vehicle is running, you can use any of the following methods: Method 1: Via Factory Settings Go to Settings > Car > Factory Setting...

In addition to adjusting the day/night mode through the standard Android Settings, you can also configure it directly in the Vivid system. Here’s how: Vivid Settings>Display>Dark Mode ...

In addition to setting the language through Android Settings, you can also change it directly within the Vivid interface. Here’s how: Vivid Settings>General In the language list, tap...

You can configure up to two applications to automatically launch when your Vivid Radio starts up. To set this up, please follow these steps: Vivid Settings>Features>Automation  

You can easily switch between the two main Vivid home themes — Classic Mode and Card Mode — by following these steps:

If you find the Novo settings feature inconvenient or feel that it affects your user experience, you can easily turn it off by following these steps: Open Vivid Settings>Features>Novo s...

Please go to Vivid Settings > Display > time formate toggle to 12 hour to set the time to 12-hour format (e.g., 2:30 PM), toggle to 24 hours to set the time to 24-hour format (e.g.,...

To change the time display format on your device, follow the steps below: Please go to Settings > System > Date&Time turn on the "Use 24-hour format" to set the time to 24-hour (e.g., 14...

Please note that this setup guide applies only to aftermarket front cameras. If your vehicle came equipped with a factory-installed front camera (or a combined front/rear camera system), the a...

If your device is displaying the wrong local time even though the time zone is set to "USA" or "China," please follow the steps below to manually correct it. Solution 1: Manually Set Home Time Zon...

To customize your wallpaper on Vivid11 or Vivid13 radio, please follow these steps: 1.Please go to Vivid Settings. 2. Navigate to Theme > Wallpaper. 3.Tap "Browse more" to view ...

We have received some customer feedback indicating that the screen brightness feels too high. Please note the following information: Current Brightness Setting: The factory default brightness ...

If your vehicle has the Canbus box, and the steering wheel controls are not working, please follow these steps for initial troubleshooting: Verify if the Canbus option has been chosen correctly: ...

Please note that the SIM card must be inserted when the device is powered off. After installing the SIM card, you need to restart the Dasaita head unit by following these steps: Go to&nbs...

Hello, I have installed a G13 in my Tundra.  It works good except the radio reception is only 2 close stations. I checked the antenna and get good reception when temp hook up the factory radi...

Salve mi potreste dire l'ultimo aggiornamento mcu per il px6 max10 ?grazie

I just had the Vivid 13 installed, and it seems to lose GPS connection.  I will be driving, and everything is fine.  Then all of a sudden, the map turns around or freezes.  Any ideas...

@Support Dasaita I had this radio before and I have updated with the G13/vivid13, but my subwoofer JBL is not working any more, is there an update available ? because the radio says that JBL is sup...

Hello @Support Dasaita Hello Would you please send me the system/firmare update file too (my model is G13/ vivid13), I also have the same problem with my radio. I'm using CB004 arneses and have hth...

@Support Dasaita Each time I reinstall a new firmware version I do those things and there are not improvements. If you say it is a hardware problem... what can we do???   Best regards