Hola,    Llevo meses con el problema de pantalla negra. La radio se escucha, cuando pulsas la pantalla suena e incluso las luces laterales se encienden. Puedo también hablar por ...

@Will Gordon please send us your current Build Number and MCU version, we would like to guide through an update. It will be better if you could provide us your order number and shopping platform.

@Marta Marta We recommend installing an app called Shouter, which reads all notifications aloud.  It works very well!&...

@Michael Underhill Please go to Settings > About machine and send us the current Build Number and MCU version. Please go to Zlink and send us the current Zlink version. We may guide you through ...

@Thomas Nelson We are wondering if you installed the head unit without powering of the car. If so, please note to power of the whole car and then reconnect the power cable. If still no luck, we wil...

@Jason Barrett After the update, please go to Factory Settings > enter 126 > raise the BT volume and lower the system volume to a suitable range.

@Jason Barrett  1. Regarding to your first issue, we are wondering if you have factory amplifier or just speakers. 2.Please install the latest zlink APK: https://www.dropbox.com/scl/fi/mq7o6...

@Ayo Olusegun Please go Settings > About machine and send us a screenshot to show us the current Bulid Number and MCU version. Note that if your unit is Vivid, the MCU should be 4.04 or newer. I...

@Jesus Sancer Please make sure that you should remove all the USBs that connected with the head units.

@Jesus Sancer Could you quit the update and go to Settings > About machine to send us your current Build Number and MCU version?

@Javier Moreno Please kindly let us know your issue so that we could further instruct you through the update.

@B C There is no need to update the APK again after you proceed and update of the firmware. We have OTA update of version 20240322, you could go to the System update apps and upgrade your version t...

@Jiohn asmithc Please send us your current Build Number and MCU version so that we could check if our firmware could fit your model.

@Adam Rosenthal Please kindly send us the current Build Number and MCU version in the same time.

@Bozo Gilic We are wondering if the following removal video could help you.

@R. L. Sorry for the late reply due our Tomb Sweeping Festival in China. We would like to tell you that the ribbon controls the touch key. You need to reconnect the ribbon after remove the small in...

@Luis Sánchez Sorry that we do not have android 10 that could customize the left widget. 

@Tuniskimo What android version is your head unit?

Te dejo mi correo por si necesitas que te echen una mano. mirlacos@gmail.com

Gracias @Juan Perez, probaré esa solución a ver que tal 👍