@Kev M New Zlink is included into the latest Software updates. Now Zlink icon disappeared and three new icons are present: Carplay /Android Auto / DLNa

@Francisco Martos @Michael Roldán Sometimes the reset button does not work as expected. Try to restart the unit, when it is still black screen but restarting ...use the needle to press ...

@Stian Børresen Is that a Dasaita unit?  

@noe saldana if you have Bose amplifier, is probably you need to adjust the Gain of the Amplifier.  Go to factory settings (pass: 126) and go to the Canbus Tab. There you will find an Volume ...

@snoophill Jean Did you solve the issue?

@Nevada White Did you solve the issue?  

@Stefano Introini as Vivid people are not very active here, I recommend you to post into the thread in which the Vivid developer team is active: [VIVID Launcher] Official Post ([Jun.18 2022] We ar...

@Jeams POULET  Did you check previosly with your seller or any Dasiata representative that THAT SPECIFIC FEATURE was supported by the unit? Not all stock features are supported. I have ...

@Paolo Zama when updating the software trying to solve an issue, check the "Wipe data" on the Update dialog that appears on the unit. Is strange. I use my unit with sleep mode always activated (DE...

@Jose Gonzalez Pareja  Answered on https://www.dasaita.com/community/forum/topic/84666/toyota-chr-vivid-11-cb004-volume-bar-is-stuck Avoid posting twice REgards  

@Jose Gonzalez Pareja This seems to be a problem of the assigned keys of the canbus, and probably, due to the canbus is not configured properly. You have to check the canbus configuration you hav...

@Ryan M did you solve the issue?  

@Modern Surawut please send feedback if the problem is solved

@John Doe as you pointed, the TMPS data is collected by the canbus and shown into the Vehicle information app. Vivid currenty does not take advantage of canbus signals and is only a lanucher with s...

@Peter MITFORD What do you mean with backup beeper?  a) Beeper when pressing any unit key?. If so, check on settings for an option to recover b) Reverse sensors sound?. If so, check if you h...

@Callum Hiscott You can connect the unit to any 12V POwer supply. Remember that only needs three cables: REd (ACC) and Yellow (BATT) simultaneouly to 12V and Black to ground  

@Zeek World The unit with -the Dasaita animation takes the same time to load the rom. remember that there is an option to avoid restarting the unit each time the engine is started. by this option,...

@The Elite @Flame Red I think it is a mistake when publishing the OTA on this firmware section. This is the link for the OTA itself: https://scout-ivi.s3.amazonaws.com/v3.1/3.1.5/telenav_s4c_...

@wally nzk Vivid 10 Version: Make Sure your unit is PX6 Andorid 10 telenav_vivid_rk3399_10.0_ota(20230112) https://www.dropbox.com/s/fopysof68tx9b1m/telenav_vivid_rk3399_10.0_ota%2820230112...

Yeah, for some reason Scout OTA Firmware updates aren't available anymore and now they only have the OS image available. Odd. With the removal of the car logos, that's fine. But now with the lates...