@Support Dasaita Hi, it is Max10
@Support Dasaita Hi, it is Max10
@Jason Ferguson
Hi Jason,
Max 10 Version Make Sure your unit is PX6 Andorid 10
telenav_vivid_rk3399_10.0_ota(20230803)
https://www.dropbox.com/scl/fi/sy068zz4tgokutkfhuwkt/update.zip?rlkey=uuhukuun3882rz4cyqxsgs9k6&dl=01.Please download the file though the link via your computer/laptop.
(Do not rename and Unzip the file)
2.Format the USB drive before copying the Update.zip file to it, then insert it to the USB cable,and it will pop out the firmware updating tips on the screen.
(Tick the option"Wipe data and format flash")
@Support Dasaita
Hi,
I downloaded and have tried installing this firmware update a couple of times now. I get the below message each time that I try to install. It starts off looking like it is going to install correctly, then it ends up going to the below screen.
Your help would be greatly appreciated.
@Jason Ferguson
Please delete the file on the USB drive and the laptop.
Please try this again,thanks:
https://www.dropbox.com/scl/fi/sy068zz4tgokutkfhuwkt/update.zip?rlkey=uuhukuun3882rz4cyqxsgs9k6&dl=0
Updated the system today to the most current firmware due to the system lagging previously. The current firmware fixed the problem of the lag, but now I have lost my Bluetooth functionality. Checked all the settings front end, and back end to no success. What is the most current MCU available? Hoping that update may fix the problem.
