Hello,
G13 does not want to switch on the Backup Camera when in Reverse Gear.
I have just the black screen with Triangle Error in the middle.
What i have checked so far:
1. Camera works in F-Cam app
2. Canbus is set to 8
3. "Prohibit reverse" settings is not there in the "Other" Sub-Menu
What else can i try?
F-Cam test:
ibb.co/TB7x3SN6
ibb.co/4ZghNn9y
Reverse Gear error:
ibb.co/zWzR7QYR
Canbus Settings:
ibb.co/WNWdRbn9
Other Sub-Menu Settings - no "Prohibit reverse":
ibb.co/BK4f3JNR
ibb.co/gMqHwfWp
ibb.co/6cN9WnrD
ibb.co/xtyv3bFJ
ibb.co/xKSzCNQx
One other thing, the written manual is confusing, showing some Vires that dont event exist:
ibb.co/nNVS4ncL
ibb.co/dsHTD83R
I dont have that "BACK" wire, and dont think that i need it.
The OEM Backup Camera gets power when tested in F-Cam app, but does not start (Power???) when putting the car in Reverse Gear.
NOTICE: to see the screenshots, just open the links in a new tab.
I have updated the firmware to: 20250421
MCU updated to: 4.16a
No changes, the Camera does not start in Reverse Gear, only in F-Cam app.
It must be a software issue - on my old PX6 unit everything works fine.
I tried the CB004 from my old PX6 unit on G13 - Camera still wont start.
PX6, plug-and-play, works fine.
Well, the wiring Troubleshoot is WRONG!
ibb.co/zWxvnYLT
You have to use the other yellow plugs for the Backup Camera:
ibb.co/gM9qXDfs
Now it works fine.
What should Dasaita fix?
1. Wiring Troubleshoot should be updated
2. Labeling on the Cables should be better, like "CAM_PRIMARY", "CAM2/CAM3", not just "CAMERA"
@Chriss PC Fix
Thanks for your suggestion.
