@Mario Waksmundzki Hello, Thank you for your contact. Please update the Firmware & MCU to the latest version via the link below,here are some tips to help you get it don...
@Mario Waksmundzki Hello, Thank you for your contact. Please update the Firmware & MCU to the latest version via the link below,here are some tips to help you get it don...
@Joe K Hello, Thank you for your contact. We don't advise to update the system if unit goes well. Here is the latest firmware for reference: Vivid10(20250401) https://www.dropbox....
Hello my carplay is not working. I can connect to the device and use bluetooth audio but the system will not connect to carplay. I cannot use Zlink, Google Maps and no Wi-Fi. Please tell me how to ...
@Support Dasaita This is photo:
@Rene Perreault Hello, Thank you for your contact. For these factory function, it works by CANBUS. Please check the CANBUS has been connected properly, and the CANBUS settings is NO.8&nbs...
@Piotr Nawrocki Hello, Thank you for your reply. May we have a picture of multimedia display of your car after installing the Dasiata unit ?
@clemente sandro It is our pleasure to assist. We appreciate it if you could leave a review of our customer service via your order. Thank you for your time and support.
@K S Hello, Please go to Settings>About machine and provide the following version information: 1.A clear photo of the stereo's Built Number. 2.A clear photo of the stereo's MCU version.
@Jacob Coates Hello, Thank you for your contact. G12 doesn't be allowed to the G13. G12 is DSP system, G13 is DTS. Please find the SIM Card Slot in the parcel to insert a SIM Card. The AT...
@Emmanuel Delgado Hello, Thank you for your details, You've udpated to the latest version successfully.
@Rene Perreault Hello, Thank you for sharing details to us. Is the air conditioning functioning properly? Regarding to the doors don't work, is it that the door information is not b...
@Errol Knott Hello, Thank you for sharing details. Please try to update the system. G13 Version:Make Sure your unit is QCM6125 Andorid 13 G13(20250620) https://www.dropbox.com/scl/fi/js...
@Dmitry Litosh Hello, Thank you for your contact. The default CANBUS setting is NO.21 . Please provide your order ID and a picture of your OEM unit to better check ? ...
I changed the canbus. Now the cameras work well. Thanks.
@Support Dasaita Unfortunately, the multimedia display only shows the driver's side temperature. The display only responds to changes in the driver's (left) side temperature and to turning t...
@Support Dasaita I also am dealing wiyh the same speaker issue on my G12. Could you send me the updated MCU as well.
and I would also like to know why? in the harness I had no black wire to ground as in the instructions thank you SP-DA7722 July 08, 2025