I'd like to mirror my mobile phone screen onto Dasaita. Can you recommend an app that works properly? My issue is that my TPMS BT sensors are recognized on my mobile but not in the Dasaita gear. Ma...

I did wipe an reset and reboot, but same result, nothing happens after factory settings with "canupdates2". No message, then i close the car, the system don't stop, after some minutes system shutd...

@Chad Durden  Hello.Thanks for your message. We have attached the new firmware&MCU, please check the update tutorial below then give it a shot.------------------------------------Update ...

@Fabien Cerkownik  Hello. For your information, it is correct for the password(canupdates2). Please use a Pin/Paperclip to press and hold the RST Button for 15 seconds to enter the recovery...

I have the same issue. 

I'm having the same issue. I have a 2016 4Runner limited with the factory JBL system. I have installed the wiring harness that you recommended and I have updated the software. Still have poor sound...

@Support Dasaita  I retry with another usb key but nothing happens. The keys are FAT32 format. After reboot i have message : "Can update time out". Password is really "canupdates2" not "ca...

@Fabien Cerkownik  Hello. For further confirmation, please tell us whether it showed "Download success!!!". Update File: https://www.dropbox.com/scl/fi/abjw0noinilji3qj5jkbt/CANBUS.U...

@Support Dasaita  1 - Thank you for screen calibration, i didn't understand the process, then now it's ok. 2 - I copied the CANBUS.UPDE (size: 85.3ko) on a usb key and when i tried to open f...

@Olivier Alirol  Hello.Thanks for your message. In order to help you better, please provide the following information:1.Order Number & Purchase Date.2.Pictures: Settings > About Machi...

@Kevin Bryant  Hello. For further confirmation, please provide us with your current Build Number & MCU version pictures. Besides, please carefully check the wiring connection, especia...

@Jean-Claude JACQUET  You are welcome :)If you have any other questions or need further support, please don't hesitate to let me know.Wish you a pleasant life.

@Fabien Cerkownik  Hello.Good day! 1、Regarding to touch buttons issue, we suggest that you can try to do the screen calibration:Settings > Car > Factory settings (password :126) > K...

@Support Dasaita  Hi and thank you for your quick support. My bad for the canbus, i thought it was used only for CB047, then i took the canbus to connect with the CB004-3. Now, rear cam and...

Hi I have a Dasaita Android 12 Car Stereo for Nissan X-Trail Qashqai Rogue 2014-2018 Wireless Carplay & Android Auto Car Radio | Qualcomm 665 | 10.2" QLED Screen | Wifi+4G LTE | 6G+64G| Build i...

I installed the update and it did not correct the problem.

@Support Dasaita Ok, thank a lot for your Quick answer. I reinstalled my PX6 but it seem me that is the same firmware. I will test during several weeks and after I will post a message with the resu...

@Mark Mark  Hello.Thanks for your message. Please confirm the setting firstly:1.Settings > Car > factory setting (password :126) > Other > Reverse Detection > Enable.2.Setting...

@Mark Mark  Hello.Thanks for your message. Please confirm the setting firstly:1.Settings > Car > factory setting (password :126) > Other > Reverse Detection > Enable.2.Setting...

@Kenneth Ward  Hello.Thanks for getting back to us.Glad to hear that it is much improved after the update.About the equilizer setting, we will report your idea to our technical department.We ...