Hello I've had my max10 px6 for several years now.Rav4 2018. Just changed the battery and now my rear view camera is upside down. I'm  going to unhook the battery and wait and then rebook it u...

 Have a datasai 10.1 in a Subaru wrx head unit worked great for a while . I was just installing rca cables for the rear speakers and the power writes touched a little . Head unit still turns o...

@Carlin Mangar I never found the settings for "Auto Sleep" in my unit. So no BT issue till now. Can you please let me know which unit you have and how to set up auto sleep? Thanks. 

Starting about 10 days ago my android auto will not play media through installed apps.  When using Audible or youtube music when I press the play button it toggle on then immediately goes to n...

I downloaded the vivid11 update and that seems to have resolved the issues.  The bluetooth will still occasionally not connect but it is very rare.  the clock issue is also resolved. ...

Na 100% wszystkie najnowsze oprogramowania z tego roku do radia Dasaita Max10 PX6 HD 1280x720 z modułem AA/CP maja błędy w oprogramowaniu skutkujące złym działaniem bluetooth - bynajmniej jest tak ...

@Iker Gomez sorry.. no it is installed.    i remeber is CB036 canbus   

@Iker Gomez I selected simple as you stated and I've tried every one of the vehicle options that show up, nothing changes I still can't select any options in car.

@Tony Ye Check to see if the Bluetooth issue is still there when auto sleep is set. I still have the issue - my Bluetooth module is WQ_RF210. There are reports on XDA Central that this is indeed an...

hello I would like to which car model I need to select in the canbuse setting for the Toyota highlander 2017 hybrid limited with JBL system 

did u get answer for this 

Thanks I purchased a SDCard and getting ready to try rebooting the unit. Quick question, is the mcu file necessary with the OTA upgrade?

I answer myself it is a software problem. The latest updates fix a few things but it makes Bluetooth not work properly. After thinking about it a lot, until an update fixes the problem, I only see...

Why do you want to upgarde? What errors do you have? If working i do not recommend to upgrade In order to get latest zlink updates you must update from A9 to A10 or A11 (for which latest software...

You have to use a OTA for the version you seen on the boot image. download then the latest VIVID 11 OTA available and put it on a fresh FAT32 formatted SDCard...and insetrt it on the unit... (on th...

@Brandon Shiers And what cnbus have you selected on factory settings?

@Iker Gomez.  It is wired correctly.  The odd thing is when I go into car setting for the canbus I can't toggle any settings on or off.  I have enabled reverse camera and get nothing...

it should be....do you have a picture of the adapter plug and how it is connected to your unit?

@Mike Dawoud  What @Jorden Peacock did for solving it (he couldn't access to the recovery menu, whatever combination of reset button) was the following: Get a microsd card and format it as F...

@Iker Gomez ok sounds good and thanks for getting back to me. Although, I do recall the head unit showing 11 during startup. I think they sent me MAX11 and I flashed VIVID10, similar issue as @Jord...