Dear Dasaita team,
I'm going to install an aftermarket front camera to my Honda CR-V 2011 with Dasaita PX6 Android 9 RK3399 head unit. I have a good wiring diagram for rearview camera in the manual, but there is no data for the front camera.
On the wiring scheme it has F CAM IN input jack + F CAM + wire.
Thanks in advance for your support!
Alex.
@Alexander Potayenko
Hi Alexander，
Here is the details for your reference:
Thanks a lot, guys. I'm really happy that I've bought Dasaita head unit and have high quality product, aftersales support, updates, etc. Thanks for your customer care!
@Alexander Potayenko
Hi Alexander，
We'd be appreciated that if you could let us know how you like our customer service.Your comment really matters and helps to keep us motivated.
@Douglas Patino
Hello.
For further confirmation, please tell us if you want to purchase "RCA cable" and "AUX In & Cam In cable"?
Hi. No, thanks I have them.
Hi. There is a mistake in the rear camera connection scheme you provided. Camera power onnection should be done not to "Reverse" wire but to "Back" wire.
There is also a problem with the front camera connection. When connected as shown, the picture is dark-grey, almost not visible. Camera side power + is connected to the wire which comes from "Front Cam power" wire. Can it be low power issue? Is it ok if I connect the camera power to some ACC 12v + and Ground? And should I leave Front Cam power wire connected in this case?
