@Ryan Williams  Hello.We will report your suggestion to our technical department.If we implement this feature in the future, we will let you know that.

@Mohammadou Mahdyou L Cissé  Hello.Regret to tell you about now there is no new Zlink.If we release it later, we will let you know.Based on your provided picture, we notice that your M...

@Support Dasaita  Yes, I understand what you are saying,  This setting specifies how low of bass is allowed to go into the speakers.  60Hz will play 60Hz - 20KHz   120Hz wi...

@Jonathan Blackwell  We are sorry to let you know the all the time display format could not be change this period as our engineer is hard to make it compatible, we are still tackling this iss...

@CARLOS LOPEZ  Hello.If your current version 20240513 can work normally, we suggest that it doesn't need to do the update further.

@Ryan Williams  Hello.Based on your video, we'd like to tell you about it is the normal situation.About that settings, it mainly reflects in the difference between high and low notes, not in ...

@Nicolas GAUTIER  Hello.Please note that it doesn't support to upgrade the later system(Android11/12/13/etc.) from Android10.It supports to update the firmware for the same Android OS only.He...

@Iker Gomez  Hello.We have reported this to our technician for modification.If there is new software, it will be updated to the forum and OTA.Please pay attention to it.

@Mcgyver83  Hello.Thanks for getting back to us.Upon checking, we notice that you purchased MAX11 version.We are wondering if you upgrade MAX to Vivid UI.And please advise whether the unit ca...

@David Picknell  Hello.Thanks for sharing the pictures.1. Could you please tell us about the installation position of 4G antenna?If possible, please try to move it to A pillar of passeng...

Bonjour , J'ai un autoradio dasaita Android12 autoradio pour Toyota RAV4 2019 2020 2021 2022 sans fil Carplay et Android Auto autoradio | Qualcomm 665 | 12.3". Mon zlink carplay fonctionne mais pa...

Buenas tardes. He reinstalado la versión 20240513 y me permitió deshabilitar el micrófono externo. Posteriormente descargue la versión 20240606 via OTA. La versi&oacu...

@Support Dasaita The OBD device that you sell doesn't access more than one CAN Bus, so it's not useful for telling detailed information about the vehicle, like fuel injeciton pressure.While many pe...

Many vehicles have much larger speakers in the back than the front.  It would be nice to be able to control the cut frequency indipendantly.  For example, In the front the cut frequency c...

Here's the video.Please understand that while the feature is cutting the bass, it is cutting it at the wrong frequency.  Whomever wrote the software somewhere added a zero into things so it do...

@Support Dasaita This is for the speaker output.  The subwoofer will be added later.  There is no amplifier.

@Support Dasaita for information, i have this canbus (cf image), but i don't find the good setting in the factory setting. Even if i reboot the headunit, the canbus still block on the 59PSAHiworl...

@Support Dasaita  Thks for your reply, you can find after the photo of the build number, to send me the latest version to update my headunit, and send me the good zlink apk. Does this head u...

@Luca .  Hello.For your information, it cannot turn on the unit without CanBus for some models.In order to help you better, please provide the following information:1. Order Number / Purchase...

@Nicolas GAUTIER  Hello.If possible, please provide us with your valid order number.So that we can locate the model your purchased and check whether the corresponding CanBus can support parki...