Before installing your new head unit(HA2179-G12 or HA2225-G12) back into the 4Runner, you’ll need to swap out some parts from the factory one. Start by removing the steel brackets on each sid...

Hi it solves the issue but after next start of the cars and the android unit, it's reinstall automatically the updates... I have to desactivate again each time i start... It's seems like another po...

Hi, Type=1TypeHi + keymode=AVM1 was the right conbinaison for me, thank you very much for your super fast answer! :)

@Thanh Tran In this case, we suggest you could update the firmware and MCU version. Vivid 11 Version Make Sure your unit is PX6 Andorid 11(The left widget's map could be customized, suggest ...

@Andrea Spagnoli We are testing the next version now, thank you for your suggestion. We are wondering if you could spare some time to leave a full-star review or feedback on the following item link...

@Joshua Hall Please kindly take a video to demonstrate the procedure that you mentioned, we would like to forward the software engineer to check. Your cooperation will be appreciated.

@Yannick Gaudin Hi there, please kindly go to Factory Settings > enter 126 > Canbus > change the Type to 1 Type Hi, change Key mode to AVM1, AVM4 or AVM5.

 @edwin villegas Can you update finally, we've check the link and it seems OK?

@Michael Uribe Could you send us a photo about the Settings that you mentioned, to show us the grey option?

@marquees richardson Please further demonstrate your issue and then send us your order number so that we could better confirm your issue. Your prompt reply will be appreciated.

@Alex R 1. Please remove the No 3 cable, see the picture below. 2. You mean that it will not being responsive sometime, so we are afraid that the connection is not firm enough. 3.AC vent, could...

@ZAKI KADOURA We will release the next version of Vivid 12 within this month. Please kindly pay attention the our post about firmware release. https://www.dasaita.com/community/forum/topic/36770/f...

@Christian White Could you find the yellow cable name BSM cable? You should connect it with the front camera cable, then go to Factory Settings > enter 126 > Canbus > Right view check if t...

1. Can you be more clear on the picture? I don't want to pull the wrong thing. 2.I'll try these these steps on the weekend and report back.. but the screen does see my fuel range and driving data ...

cuales son las ultimas actualizaciones para este modelo?  

Do you have an ETA on the next update release for VIVID 12 for Qualcomm6125

Hi @Ray Marin ,  Sorry to hear about your trouble. Can you reach out to our team at scoutsupport@telenav.com - we need some more information about your system, and we will be able to get you ...

My device works fine 9 out of 10 times, but sometimes it does not turn on ( black screen, left button panel light up with blue color). When it does not turn on, it does not have a Bluetooth signal...

@Kayla H i am currently having the same issue with mine and i have had it less than a year. did you ever find a solution?

@Support Dasaita Hello I need to add an APN to my SIM settings for my Verizion Wireless service. The APN I need to add is we01.vzwstatic . When I attempt to add it myself I am unable to becaus...