@Ryan Williams Hello.If possible, could you please record the related video then send it to us?So that we can learn the specific situation and forward it to our technical department for furt...
@Ryan Williams Hello.If possible, could you please record the related video then send it to us?So that we can learn the specific situation and forward it to our technical department for furt...
@Nicolas GAUTIER Hello.For your information, it doesn't support to upgrade the later system Android13 from Android10.In order to help you better, please go Settings > About Machine, ...
Good morning, I can no longer connect to Zlink, although it worked perfectly before. Is this a problem updating Zlink, or update the headunit. I am currently on Android 10, with a PX6 in versi...
On my G12 11" QCM6125_20240111-1739, the Cut frequency in amplifier is off by 10X If you set 60Hz It crosses it over at 600Hz If you set 80Hz It crosses it over at 800Hz If you set 1...
After calling Hiworld customer service, it turns out that they no longer update for the Peugeot 407,thus rendering the canbus inoperative. So I'm going to put the original canbus back,knowing that ...
2017 Tundra SWC Up and down buttons work to change songs but left and right audio buttons do not work. Verified Canbus on optopn 8, Tried going into factory settings and changing things wit...
@Lomond Johnson check the following: 1) check the wires are tightlyu connected 2) check your nbattery's health 3) try to update your firmware to the last available one.
@Michael Uribe in my opinoin, your issue is a clear symptom of a dead battery. Check your battery health for a new battery. Dasaita units have an algorithm (AFAIK) that monitors your input voltag...
@Support Dasaita developers are changing the dpi on each update. I think it could be useful to put an option on the Zlink setting to chose between three or two levels of dpi settings
@snoophill Jean PX5 units are no longer to be updated. I have checked to a repository, and the latest version available (from all the manufacturers that made px5 MTCD/MTCE units) is the Dasaita one...
Before purchasing you MUST check which original (stock) options of the car are availbale or not. Depending on the canbus some options are available and other not. Not ALL stock options are a...
@Iain Sherrit There is a stetting under "Car settings" (check them all as i dont remember exactly where it is) for setting up the audio when reverse camera is active. You can select from "no audio"...
In my case I can use the microphone ok for calls, by the android system does not reconize any audio input (Teams app or "OK Google" or any audio recording app). I think developers must check this i...
You have to remove the pin from the Sim, so it will always recognize it.
New G12, purchased 3 weeks ago. Worked fine during phone calls until recent update. Now there is no microphone audio during calls. The head unit does not hear any audio during cal...
Hi, Is there and update or no for px5 3368 with this issues since several months??
@Support Dasaita, If I disconnect my speakers and turn the volume up, my sub will start to work. It is very low volume. I'd be happy to try the modified amplifier. I installed the MCU, I'm not su...
Is there any way you could update the DSP settings? Could you extend the "CUTOFF" & "BASS" to 40hz or 50hz instead of 60hz being the lowest? And Could you add a 180 degree phase button for the ...
@K D do you have another issue??
@Support Dasaita i'm sorry, I did not understood:( My order is Order SP-DA2538. I just received another update 7.5.4398.