Thank you very much, it works. I couldn't figure out this method myself.Best regards.

@Robert Devillier  Hello， Thank you for your reply. Please take a picture of showing the issue. Please also go to Settings>About machine and provide the following version information: ...

@Fabien Cerkownik  Bonjour,Je voudrais simplement savoir s'il est possible de désactiver la trajectoire inverse sur votre unité OEM ? Hello, Just would like to confrim if it's...

@Eminit  Hello, Thank you for your details. For your order #SP-DA7023, we found that you also bought a aftermarket reverse camera. Just would like to confrim the current reverse camera in ...

I installed the new g13 in my 2017 trunda. It replaced an older PX5/6? I dont remember which one. But on the old unit I it would auto toggle to the front camera going from reverse to drive. I can n...

I have a 2020 Toyota Tundra and just received my Andriod 13 unit.  I unboxed the wire harnesses and there are two sets.  One for the 2014-2019 (CB004) and 2020-2121 (CB047).  The dir...

I have a 2020 Toyota Tundra and just received my Andriod 13 unit.  I unboxed the wire harnesses and there are two sets.  One for the 2014-2019 (CB004) and 2020-2121 (CB047).  The dir...

Mir gefällt dieses Beispiel sehr gut, aber damit KI alles steuern kann, insbesondere den Fahrmodus, müssen wir berücksichtigen, da es sich um ethisches Verhalten handelt 

Stellt euch vor, ihr sitzt im Auto, und statt eines einfachen Navis habt ihr ChatGPT als Beifahrer: Es plant nicht nur die Route, sondern unterhält euch, beantwortet Fragen oder hilft sogar be...

Settings > Car settings > Tap Factory settings > Type adbon and hit enter. This will enable developer settings, which is located in the "About" tab of the Android settings. Keep in mind th...

How do I enable access to Developer Options? The standard method of tapping the build version doesn’t work, and I can’t find an option to enable it in Factory Mode.

Good morning, I’m joining the request. The brightness is very high and does not adjust automatically. The adjustment range is also very limited compared to smartphones, it’s like dimmin...

Good morning, is there any option to change the DPI in the Zlink app? My radio version is QCM6125_20240903-1414 (I saw that there is a 20250311 version—should I update?), and my Zlink version...

Thanks so much for the info, Ronny!

@Support Dasaita what do you mean with "new system"? @Manuel Bernet where did you found this new firmware version?I'm looking for a way to have android auto wireless: I red in message above that a...

Yes, when I plug the usb in music pops up but it doesn't play any sounds. 

@Support Dasaita Why doesn't the G13 support the OBDLink MX+ when other Android head units like Atoto do? Is it a hardware limitation, software issue, or Bluetooth compatibility problem? OBDLink MX...

@Corey Billinger Hello, Please go to Settings>About machine and provide the following version information: 1.A clear photo of the stereo's Built Number. 2.A clear photo of the stereo's MCU v...

@PAUL WELSHEIMER  Hello， Thank you for your reply. Do you download it as local app on unit ? You could download on your phone and it will work via Carplay

@Robert Devillier  Hello， Thank you for your reply. Please take a picture of showing the issue. Please also go to Settings>About machine and provide the following version information: ...