I got the new iPhone 17 and with the new USB-c connection via USB, the Dasaita radio is not launching carplay. ( does not work with Bluetooth either )
PX6 Andorid 11
telenav_vivid_rk3399_11.0_ota(20250217)
Any ideas ?
I got the new iPhone 17 and with the new USB-c connection via USB, the Dasaita radio is not launching carplay. ( does not work with Bluetooth either )
PX6 Andorid 11
telenav_vivid_rk3399_11.0_ota(20250217)
Any ideas ?
@Kurt Davenport
Dear customer,
Please update the Firmware to the latest version via the link below,here are some tips to help you get it done:
①Vivid 11 Version Make Sure your unit is PX6 Andorid 11
telenav_vivid_rk3399_11.0_ota(20250401)
https://www.dropbox.com/scl/fi/gvynerjbwf5qlcap3bphs/update.zip?rlkey=v1p7o6vppnyfpm9cgwguqwak2&dl=0
1.Please download the file though the link via your computer/laptop.
(Do not rename and Unzip the file)
2.Format the USB drive before copying the Update.zip file to it, then insert it to the USB cable,and it will pop out the firmware updating tips on the screen.
(Tick the option"Wipe data and format flash")
I tried this today but it still does not work for CarPlay either tethered or via Bluetooth.
any other suggestions ?
@Kurt Davenport
If there is an activation Code on the CarPlay page?What happen on the screen when you connect the wireless CarPlay?
I'm never promoted for any activation code.
If connected via Bluetooth to the radio, I open the CarPlay app on the radio and nothing happens.
then when I go to CarPlay on my iPhone it shows the scout option but it will not connect even though there is already a Bluetooth connection present.
@Kurt Davenport
Please go Settings > Car > Factory setting (Password: 126) > App >BT,choose following option one by one to see which one is work for the CarPlay.
1.FSC-BW124
2.WQ RF210
3.WQ-BC6
4.SDIO-AUTO
Id prefer to not use BT. Is there any troubleshooting for why the hard wire connection doesn't work ?
None of those options seemed to have any effect. I tried 3 of them and one was not available to try.
Could you please go to Settings>About machine and provide the following version information:
1.A clear photo of the stereo's Built Number.
2.A clear photo of the stereo's MCU version.
What is the delay with uploading pictures ?
Build number
rk3399-userdebug 11 RQ3A.210705.001
MCU version
MTCH_HA_V3.89a_1
